Caught in or compressed by equipment or objects, unspecified · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Roll Rite, LLC, 323 Technology Park Drv, TORRINGTON, CONNECTICUT 06790
on — Amputations, affecting the fingertip(s).
Final narrative
At 8:15 a.m. on February 12, 2020, a Roll-Rite employee was installing a tarp system for a trailer when his left little finger was caught between a cable and a pulley. The fingertip was pinched off. The employee was hospitalized.
HospitalizedAmputationFingertip(s)Vehicle and mobile equipment parts, unspecified
An employee was changing mud cups in the hopper cylinders of a concrete pump truck. The cylinders moved and three of the employees fingers were amputated.
An employee was standing on the rig floor next to a polishing unit. His hand was placed on the polishing unit when the pump was lowered, resulting in amputation of their right thumb, ring, and middle fingertips.
An employee was using air to blow out the air wash to the blender and grinder station. As the employee reached to verify that the air wash was clean, the unit pinched and amputated their fingertip.
An employee was retrieving a lost drill pipe with a lifting bail when their left thumb got pinched between the table and handle of the lifting bail while trying to re-thread the pipe to lift it out. The employee suffered an amputation to the left thumb.
An employee was removing a core chuck from a stationary roll when their right ring finger was pinched between the chuck and the roll. The employee's fingertip was amputated.
More severe injuries in this industry (NAICS 441310)
An employee was carrying a plastic tote full of brake rotors. His foot caught the corner of a pallet, causing him to fall to the concrete floor and break his hip.
An employee was working on a vehicle in a bay. As he turned around, his foot caught on the leg of a lift and he heard/felt a snap and pop in his right hip and fell. The employee sustained a torn hamstring in his right leg.
An employee was installing a driveshaft on a customer's vehicle. He was using a floor jack to hold the driveshaft in place to line up the bolts. The driveshaft moved off the jack and crushed his left ring fingertip, resulting in an open fracture of the tuft of the distal phalanx, as well as a partial amputation.
An employee was in a truck, helping a team lift a 55-gallon drum into the truck. The employee fell to the ground and suffered a broken left arm. The employee was hospitalized and required surgery.
An employee was checking on a machine outside of the building and removed a cover to clean out a blocked area. His hand was caught by a rotary valve in a dust collection machine. The employee's fingertip was amputated.
An employee was working to clean a glue roller with a scraper tool. The tool and the employee's left thumb were pinched between two rollers, resulting in a partial amputation.
An employee was re-arranging boxes of pipe insulation on a pallet. One of the boxes fell from the pallet and knocked over an upright empty cylinder. The cylinder fell and crushed the tip of the employee's right toe. The employee's toe required surgical amputation.
An employee was securing the claw of a grapple truck to the truck bed. His left little finger was caught between the tie down strap and the rub rail of the truck, resulting in partial amputation of the finger.
An employee was cutting extruded aluminum framing material using a horizontal band saw. She went to grab a rag in the machine when the rag contacted the blade and pulled her hand in toward the blade, resulting in a partial amputation of the right index finger.