Keystone Plastics, Inc.

An employee's finger was caught between the crimping rollers on the extrusion line while removing a jam, resulting in an amputation and hospitalization.

Employees were assembling and testing a butterfly valve unit and actuator combo. When the unit was function tested with air, the valve gate closed on an employee's left thumb resulting in a fracture and laceration.

An employee was doing a daily inspection of the sifter screen on a mixer when the mixer line activated. The armature for the screen struck the employee's right wrist. Their wrist was cut and their hand was fractured.

An employee was being trained on a machine when a roller came down on their hand, resulting in a fracture and laceration.

An employee was doing a dry run during the setup of an ice cream machine. The machine indexed and the filler head amputated the employee's left middle finger above the last knuckle.

An employee was on a 3-foot ladder guiding cable onto a spool during installation on an overhead door. As the control box was jogged, the employee's hand was caught between the cable and spool, resulting in a wrist and hand fracture.

An employee was cutting hanks of material on an abrasive cutter. A hank end opened up. As the employee was working to clear loose material, the machine was triggered and amputated 1/4 inch of his right middle fingertip.

An employee was operating a feathertipping machine, using it to feathertip the bristles of a handled brush. The employee's fingers became stuck in the machine, and the employee's little finger and ring fingertip were amputated. The machine was guarded at the time.

An employee was operating a re-winder machine, re-winding fabric rolls for use in production. The employee's fingers became caught in a nip point and were pulled into the spinning fabric. The employee suffered a crush injury to their right middle finger, resulting in hospitalization and medical amputation of the fingertip.

On December 10, 2024, an employee was driving a stand-up forklift, moving pallets off racks in a building. The employee's hand was caught between the forklift and the bar that prevented ride-under, resulting in a crush injury to the left hand. The employee was hospitalized.

An employee was inserting fabric into a winder machine when her hand was pulled into the machine. Her right little finger was amputated, and she sustained an injury to her right ring finger.

An employee tripped over a stool and fell on the floor, resulting in a left displaced mid-cervical femoral neck fracture.

An employee was installing fence posts when they stepped into a recently dug hole that was not visible due to rainfall. The employee's leg was fractured.

An employee assisted in cleaning material from a conveyor pit. After the pit was cleaned, the employee proceeded to replace metal safety plates to ensure other employees did not fall into the pit. While replacing one of the last plates, the employee mis-stepped and fell approximately 5 feet into the pit. The employee was hospitalized with back/side bruising, elbow bruising, bone bruises, and/or fractured ribs.

An employee was inspecting a breaker box and turning on/off a circuit breaker when he was electrocuted.

An employee was walking on the sidewalk. When they stepped off the curb, they fell to the ground, resulting in fractures to their tibia, fibula, and a metatarsal.