National Beef

An employee was conducting maintenance and checking alignment on a conveyor belt in the fabrication area of the plant. The employee's sleeve was pulled into the conveyor belt, resulting in an amputation that required hospitalization and surgery.

An employee was cleaning in the pack off area of the facility using a high pressure hot water hose. The employee was walking with the hose when the hose got caught on the conveyor frame in the area and the employee lost their grip on the hose. The hose fell to the ground and the employee was sprayed with hot water. Hot water got inside their boot and the employee sustained first and second degree burns to their left foot.

While attempting to realign a crate, an employee slipped and fell to the same level. The employee was hospitalized with a fractured leg.

An employee was using a production band saw to cut beef. The saw amputated the tip of his finger.

An employee was transferring cattle to a corral when a cow charged and trampled him. He suffered lacerations to the back of his skull and his bottom lip, as well as contusions on the right shoulder, right leg, left knee, and left leg.

An employee was training and moving horses when one of the horses knocked her to the ground, resulting in fractures to the left arm, both legs, and the right ankle. The employee also sustained bruises to the face.

Employees were at a barn checking on mules and feeding them. While the employees were in the corral, the mules became spooked. The injured employee was kicked or stepped on by the mules, resulting in a concussion, fractures to the left shoulder, arm, and hand, as well as a bruised knee and ribs. The employee underwent surgery.

An employee was delivering pizza to a private residence when the customer's dog knocked the employee over. They sustained a torn ACL.

An employee was waiting for a patient at the front door when a dog jumped on her, causing her to fall down the stairs and sustain a fractured left little finger and thumb.

An employee was loading animals when they became pinned between an animal and a chute, resulting in the partial amputation of the left middle finger.

An employee was scraping dried glue from the top lid of a hot glue pot. His left hand slipped and came into contact with the hot glue. He then suffered burns to his hands and fingers as he tried to remove the glue. He was hospitalized.

An employee was in a scissor lift approximately 20 feet above the ground to place a plastic tarp on a catwalk in order to catch condensation. They positioned the lift opposite the work area and stepped out of the scissor lift onto an I-beam. The employee fell from the I-beam to the ground. The employee was hospitalized with a skull fracture on the right side of their head and injuries to the chest and both eyes.

A maintenance employee was called to look at a pallet conveyor machine where a chain had fallen off a sprocket wheel. When the employee grabbed the loose chain, a light sensor caused the machine to restart. This created a pinch point between the chain and sprocket that caught the employee's left little finger. The finger was surgically amputated at the second knuckle.

The injured employee was standing by one of the stationary computers along the wall. There was a half-pallet located approximately 3 feet behind the employee that consisted of 12-pound boxes stacked six boxes high. A forklift was transporting a pallet that came in contact with the stationary pallet behind the injured employee, causing four boxes to fall and contact their legs. The injured employee was hospitalized with leg injuries.

An employee was using a box strapping machine to place straps on boxes when his right middle finger was caught in the machine, resulting in an open fracture to the distal phalanx.

An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.

An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.

An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.

Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.

An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.