Titan International Inc.

An employee was checking tank levels in the facility using a ladder. The employee fell off the ladder to the ground approximately 6-7 feet below and sustained a back injury.

On June 5, 2020, a utility cart and a golf cart collided. The golf cart's driver fell out of the cart and suffered a hip injury. The employee was hospitalized.

An employee was operating a machine when a wire pulled his right glove resulting in amputation of the index and middle fingertips.

An employee was grinding chicken when their right index fingertip was caught in the grinder and amputated.

An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.

An employee was passing through a large metal door when the door closed on the employee, resulting in a cracked rib.

An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.

An employee was monitoring a conveyor at the operator station. A piece of metal was fed to a conveyor system and it struck another piece of metal, causing a piece of titanium (1-inch-long and 1/2-inch-wide) to break off and strike the employee in their upper chest below the clavicle. The employee was hospitalized and the embedded piece of metal was surgically removed.

An employee was working by the slag side of a reverb in the furnace department. They returned home after the end of their shift and began feeling muscle cramps, resulting in hospitalization due to dehydration.

An employee had been working in the refinery area of the facility. He then began to feel dizzy and suffered other heat illness symptoms. He was hospitalized for possible heat stress.

On May 14, 2025, an employee was sitting cross-legged and removing a pneumatic rail car vibrator from its bracket to empty the next pocket in the rail car. When the employee went to set the vibrator down, he placed it on a hammer that was sitting in front of him and the vibrator teetered to the side, catching his little finger. The employee sustained an amputated fingertip at the first knuckle.

An employee was opening a railcar compartment using a wrench when the tool broke and the employee slipped and fell to the same level. The employee sustained a fractured lower right leg.

An employee was closing a door when the door closed on their right index finger, resulting in a fingertip amputation.

An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.

An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.

An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.

An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.