105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

AM/NS Calvert, LLC

Direct exposure to electricity, unspecified · Electrical burns, unspecified

Federal OSHA recorded a severe workplace injury at AM/NS Calvert, LLC, 1 AM/NS Way, CALVERT, ALABAMA 36513 on — Electrical burns, unspecified, affecting the hand(s), unspecified.

Watch Am/Ns Calvert, LLC — free Get an email when a new federal OSHA severe-injury report for Am/Ns Calvert, LLC is published. One employer, no account, unsubscribe in one click.

An employee was troubleshooting an overhead crane. A part in the electrical cabinet caused an arc flash that burned his right hand. He was hospitalized.

Hospitalized Hand(s), unspecified Switchboards, switches, fuses

AM/NS Calvert, LLC

An employee was cutting the stringer and resetting the side trimmer when the trimmer rotated, causing steel material to move and strike their foot. The employee sustained a fractured foot.

AM/NS Calvert, LLC

Employees were moving an electric motor with a crane. When the motor came free, a piece of its mount struck an employee, breaking their left forearm.

AM/NS Calvert, LLC

An employee was cleaning the rotary valve of a machine when his right middle and ring fingers were caught in the valve. The employee was hospitalized and both fingers were amputated to the first knuckle.

AM/NS Calvert, LLC

An employee was changing out a work roll in a tilt plant at a finish mill. His left foot was caught and broken in a pinch point.

AM/NS Calvert LLC

On February 16, 2015, employee walking on flat level ground collapsed and broke his hip.

View AM/NS Calvert, LLC's full OSHA safety record →

Bob Woodall Air Care Systems, Inc.

An employee was installing a 15-amp breaker in an electrical panel when a 12-gauge ground wire touched the positive busbar of the panel, resulting in an arc flash. The employee sustained a second-degree burn to their left hand.

Amentum Spaceport LLC

An employee was repairing an HVAC system in the drop tile ceiling of a conference room when they were shocked, causing them to fall from the ladder. The employee sustained burns to their right middle and ring fingers.

Marsh Bellofram Corporation

An employee was replacing a contactor inside an electrical panel attached directly to a press. The press itself was receiving power from another main panel. After replacing the contactor, the employee flipped the switch and an arc flash occurred, burning the employee's elbow, bicep, and neck.

Heart Utilities of Jacksonville, Inc.

An employee was attempting to switch a medium-voltage primary cable and install a 200-amp fuse barrel. The employee contacted the bottom of the switch gear cradle for the fuse barrel, causing an arc blast. The electricity entered the employee s left hand and exited his big toes, resulting in electric shock and burns to the left hand, arm, shoulder, and both feet. The employee was hospitalized.

Duke Energy Florida, LLC

On December 6, 2023, an employee of Duke Energy was working on a single-phase 120-/240-volt parallel service re-tap when a secondary flash occurred in an underground service. The employee suffered a second-degree burn to the face and was hospitalized.

Universal Stainless & Alloy Products Inc.

An employee used a crane to set down a bar. The bar measured 9 inches by 16 feet. The strap got stuck under the bar, and the employee asked another employee to jog the roll. The bar rolled and pinched the injured employee's left hand, resulting in a fingertip amputation.

Priefert Manufacturing

An employee was loading a steel forming machine with steel to be processed. He went to move a cooling hose out of the way and his left thumb was crushed by the forming roller, resulting in injuries that required surgical amputation.

CF&I Steel L.P.

An employee was advancing a rail to line up for welding with a secondary rail on the weld line when his right middle and ring fingers were caught between the rails. The employee sustained an amputation to the top knuckle of the middle finger and a fracture to the ring finger. The machine was guarded at the time.

United States Steel Corporation

An employee was working near molten metal and experienced heat illness symptoms including cramps. The employee was hospitalized.

Tampa Bay Steel, LLC

An employee was preparing bundles of 24-foot square metal tubing to be loaded onto a truck and cut the safety band for a bundle. While the employee was removing a piece of dunnage from a bundle, they bumped the bundle with their leg. The metal tubing then fell forward and struck the employee, causing a fractured left ankle.

Sysco Gulf Coast, LLC

An employee was traveling down the maintenance aisle of a warehouse on a single-pallet front rider jack. The jack malfunctioned, causing the brakes to apply; the employee fell forward onto the concrete warehouse floor. The employee suffered an injury to the left leg and was hospitalized, requiring surgery.

Norflex, Inc.

An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.

Ampler Pizza II LLC

An employee was shot in the leg with a pistol during an altercation with two people who had entered the store without permission.

Birdsong Corporation

An employee was directing a truck driver to a dump site when the truck's peanut trailer slipped off the kingpin. As the trailer fell, a ladder attached to it lacerated the employee's ear. The employee was hospitalized.

Pilgrims

An employee was unloading a forklift from a trailer to the ground. The employee was climbing down the ladder of the trailer when their foot slipped through one of the rungs, causing them to fall backward onto the forklift forks. The employee was hospitalized for fractured ribs.