The Gund Company, Inc.

An employee was unjamming a piece on a shape pultrusion line. Once the piece was trimmed back, an employee realigned the second puller on the line so that the cured piece could pass through the second puller. When the cycle was engaged, the machine amputated the tip of the employee's right thumb.

An employee was reaching for parts on a press brake when the machine amputated four digits on the left hand and one digit on the right hand.

An employee was operating a machine when a wire pulled his right glove resulting in amputation of the index and middle fingertips.

An employee was grinding chicken when their right index fingertip was caught in the grinder and amputated.

An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.

An employee was passing through a large metal door when the door closed on the employee, resulting in a cracked rib.

An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.

An employee was working to reposition a spacer located between pinch roll mounting blocks on a slitter machine. He was standing to the side of the control panel with one hand on the control switch. While reaching for the spacer with his other hand, the control panel was inadvertently pressed and the pinch rolls closed, causing his left index finger to get caught between the upper and lower mounting blocks. The employee sustained an amputation to the fingertip.

An employee was sanding a conduit pipe inside a CNC lathe. The employee's left hand and arm became entangled in the running clamp of the machine and the employee sustained a broken left forearm.

An employee was unjamming a piece on a shape pultrusion line. Once the piece was trimmed back, an employee realigned the second puller on the line so that the cured piece could pass through the second puller. When the cycle was engaged, the machine amputated the tip of the employee's right thumb.

An employee was operating a hoist to lift material. His left index finger became pinched between a D-ring (lifting device) and the material being lifted, resulting in an amputation of the fingertip.

An employee was setting up a cable loop machine and training employees on the set-up procedures. As the employee loaded product, the clamp closed on their left hand and amputated their index finger. The employee had surgery.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.

An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.