Compressed or pinched by shifting objects or equipment · Avulsions, enucleations
At a glance
Federal OSHA recorded a severe workplace injury
at Westrock CP, LLC, 365 Audubon Road, WAKEFIELD, MASSACHUSETTS 01880
on — Avulsions, enucleations, affecting the hand(s), unspecified.
Final narrative
An employee was loading a paper roll onto a machine using a pneumatic powered dolly. The employee's hand was caught between a stationary roll of paper on the floor and the roll of paper they were moving. The employee suffered an avulsion to the hand and was hospitalized.
HospitalizedHand(s), unspecifiedIndustrial vehicle, material hauling and transport-powered, n.e.c
An employee was quality checking a cutting device on a paper machine. As he went to manually rotate the flat outer surface of the band motor, his right index finger contacted the cutting side of one of the blades, resulting in a fingertip amputation. The machine blades were guarded at the time.
An employee was loading a 9,386-pound paper roll onto a peel station. The paper rolled off the station and the employee was caught between two rolls of paper, resulting in a pelvis fracture.
While conducting maintenance, an employee was feeding wire into a baler machine. As the employee was guiding the wire, the machine started; it broke and lacerated the employee's left arm.
An employee was threading a paper winder. When the paper curled, the employee tried to straighten the paper and contacted the paper slitter, resulting in a partial amputation to their right index fingertip.
Employee 1 was replacing a bucket (480-volt breaker) while Employee 2 was observing from outside the arc flash boundary (36"). Employee 1 completed the work and was closing the door when an arc flash occurred. Employee 2 sustained first degree burns on the forehead and cheek and first and second degree burns to the hand. Employee 2 was hospitalized. Employee 1 was not injured.
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 322211)
On October 22, 2025, an employee was working to put a conveyor chain back on the track of a conveyor when their fingers were caught between the chain and the chain track, pulling their right hand into the sprocket. Four fingers were amputated.
An employee was cleaning the headers of the core machine using a hand drill with a brush attachment. His glove was caught on the brush shaft, resulting in amputation of the left middle fingertip.
An employee was operating a winder paper mill machine when their right index finger became caught in the machine. The finger was partially amputated at the first knuckle.
An employee was lubricating a chain and sprocket on a corrugator splicer. He lost his balance, and his right middle finger came into contact with the chain and sprocket. The fingertip was amputated at the nail bed.
An employee was entering a building and reached out to catch a closing door. The door closed on the employee's finger, resulting in the partial amputation of the fingertip and nailbed.
An employee fell while exiting a trailer. The employee landed on their left side on the pavement, suffering multiple broken ribs on the left side. The employee was hospitalized.
Two employees were setting up a mandrel in the spindle of a machine. The mandrel was side-shifted while an employee's hand was on the mast of a powered industrial truck. The employee suffered crushing injuries that resulted in amputations to the middle and ring fingertips.
An employee had been loading a double deck press. The employee saw a mold had been sent in with the C-hook still attached on the belly bar. As he went to remove the hook from the mold, his right thumb got caught on the C-hook. The employee's thumb was partially amputated.
An employee was operating a roller and paving a small pathway next to a pavilion. The ground was on a slight pitch, causing him to reach up toward the roll cage to stabilize himself. His right fifth finger was pinched between the roll cage and the rafter of the pavilion. The employee sustained a partial degloving injury with partial traumatic amputation.
An employee was delivering home heating fuel when bees came from the ground and stung the employee's face, neck, torso, and hands. The employee proceeded to shut off the oil flow before losing consciousness. They were hospitalized due to an anaphylactic reaction.