Caught in running equipment or machinery during maintenance, cleaning · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Polytainers Inc, 1400 NE Douglas St, LEES SUMMIT, MISSOURI 64086
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
An employee was troubleshooting the injection molding machine and amputated their left ring finger.
A maintenance employee was working on a conveyor when his thumb was caught in the chain/sprocket area causing an amputation to the thumb tip. The machine was running at the time of the incident.
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 333511)
An employee was operating an overmolding injection machine. His left hand was crushed when the hydraulic plates came together to complete the overmold process. The employee was hospitalized with a fractured left ring finger and abrasions on both sides of his hand.
On April 4, 2025, an employee was assembling a cooker and was positioning a shaft inside the shell. The shaft was lifted up on each end. When the weight is off the shell, cranes move north or south to position the cooker inside the shell. The cooker shaft suddenly moved and his right middle finger was caught between the cooker shell and a gauge block. The finger was amputated to the bottom of the fingernail.
An employee was using a floor-mounted vertical sander to deburr a part. The part got caught between the guard and the sander. The employee's hand was pulled in and the sander crushed the employee's fingers.
An employee was operating a wax injection die. The die's metal lid (which weighed about 125 pounds) fell on his hand. He suffered crush injuries to the index and middle fingers that required surgery.
On June 27, 2024, an employee was assembling a completed mold top weighing 1,261 pounds. The hook from the hoist was under tension. She went to adjust the hook and it moved, catching her left thumb against the mold top. She sustained an amputation to the tip of the thumb.
An employee was readjusting a safety hook to remove hardware from gang forms when his feet slipped. He fell to the ground, resulting in a broken left arm and wrist.
An employee was on a step ladder in a store aisle, making room on shelving for merchandise. She fell from the step ladder to the floor, suffering two fractures in her left leg. She was hospitalized, requiring surgery.
An employee was closing the side cargo door to a company van. The tip of his finger got caught between the door and the door jamb, resulting in a partial amputation.
An employee lost his footing while climbing an inclined ladder. He stumbled down one step and was able to stabilize himself by holding the railing and twisting his body, but he suffered an internal abdominal injury and was hospitalized.