Shooting by other person-intentional · Gunshot wounds
At a glance
Federal OSHA recorded a severe workplace injury
at MOLDED ACOUSTICAL PRODUCTS OF EASTON, INC., 600 HIGHWAY 322, CLARKSDALE, MISSISSIPPI 38614
on — Gunshot wounds, affecting the upper and lower limb(s).
Final narrative
During an attempted robbery, an employee in the parking lot was shot twice. The employee sustained bullet wounds to the shoulder and leg.
HospitalizedUpper and lower limb(s)Robber
More severe injuries at MOLDED ACOUSTICAL PRODUCTS OF EASTON, INC.
An employee and two customers were involved in a verbal altercation that escalated into a physical altercation. The employee was shot in the left thigh by the customer and required surgery.
An employee was involved in a dispute with a campground customer when the customer fired a shotgun. The employee's finger was partially amputated and his head was grazed by a bullet. The employee was also shot in the thigh.
A U.S. Park Police Officer sustained multiple gunshot wounds during an engagement with an armed assailant who was attempting to flee the scene of a crime. The officer was hospitalized and required surgery.
More severe injuries in this industry (NAICS 327993)
On July 17, 2025, an employee was informed that the overtravel cable came off the wire rope drum. He went to unwind the rope drum. The bucket moved and caused the rope to tighten on the employee's right thumb, resulting in a partial amputation.
AN employee was working on the automated feed line when the pusher jammed. The employee cleared the jam, which caused the pusher to activate the press. The employee's right middle, ring, and little fingers were caught between the press mechanism and the material, resulting in amputations to the fingers.
An employee was installing a belt onto the sheave of a fan motor. The machine was being rotated by hand to put a new belt in place when the employee's fingers got caught between the machine and the belt, resulting in a partial amputation of the little fingertip.
An employee was preparing a glass melter for extensive repairs. Water was being introduced into the melter with a lance to break up the hot glass. The water caused the molten glass to exit the melter with force, contacting the employee. The employee sustained thermal burns to their forearm, neck, and head.
An employee was checking a pole-type transformer tank for leaks. A hydraulic clamping device was lowered onto his right thumb and crushed it against the sharp edge of the bottom of the tank. He suffered a partial transphalangeal amputation to the thumb.
The injured employee was standing behind a table. She jumped out to scare another employee, but tripped and fell on the tile floor, injuring her right ankle/foot. She was hospitalized with a dislocated ankle that required surgery.
An employee was going into a trailer to mark product for shipment and the trailer pulled away from the dock. The employee fell out of the trailer, contacted the dock plate, and then fell to the ground. The employee was hospitalized with a punctured lung, fractured ribs, and contusions.
An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.
An employee was operating a gas tugger to lift metal sheeting. His left hand was pulled into the pulley, which crushed his left thumb, resulting in avulsions and other tissue damage. He was hospitalized and required surgery.