An employee was hot patching a tire, which involves lighting a flammable liquid on fire to patch the tire. The flammable liquid contacted his arm, and he sustained burns to his arms and face.
On July 19, 2025, an employee was filling a wheelbarrow tire with air when the tire exploded, resulting in severe injuries to their right hand including a partial amputation.
An employee was placing an automotive tire on a balance and mount machine when the tire crushed their left ring fingertip, resulting in a fingertip amputation that was surgically reattached.
Two employees were attempting to align a car with an alignment rack, but the rack was not reading the car properly. The employee in the car attempted to move the car back and forth so the rack could read it when the car rolled off the rack and struck the injured employee, resulting in a fractured leg.
An employee was climbing a step ladder while carrying a 3-foot piece of conduit. As he went to reposition his feet on the ladder by pivoting, he slipped and fell from the third rung of a 6-foot ladder. The employee sustained fractures to the left femur, right elbow, and right ring finger.
An employee was descending a 4-step maintenance stand when she missed the bottom step and fell to the hangar floor. The employee suffered a left hip fracture.
An employee stopped a belt and was going to check it for missing packages. She fell backward 3-4 feet from an elevated platform and sustained a broken right arm.
An employee had just finished a routine concrete pour and was ascending the ladder to clean the concrete mixer truck. The employee lost their grip and fell approximately 2-3 feet, contacting the truck's bumper. The employee suffered rib fractures and a punctured lung.
An employee was performing duties as an expeditor. After opening the dock door, the employee scanned the barcode on the door of the truck and placed one foot on the truck and one foot on the dock. The truck drove out of the stall, causing the employee to fall 4 feet off the dock onto the concrete. The employee sustained fractures to the right side of the pelvis, elbow, and a left ring fingertip as well as injuries to the right wrist and bruising to the back and stomach.
More severe injuries in this industry (NAICS 811118)
An employee was replacing the cutting edges on the bucket of a wheel loader. The bucket had been lowered onto composite blocking to prevent it from falling to the floor. The blocking dislodged and the bucket fell and crushed the employee's left hand.
An employee was walking on top of a piece of equipment while engaged in repair activities. The employee stepped onto a rotating impeller shaft of a belt-driven exhaust fan and sustained a partial amputation to their right leg below the knee and amputation of their left hand.
An employee was installing an automobile lift at a client location and put the lift on a safety lock. The employee's right hand was caught in the lift and crushed, causing the amputation of the little finger at the last knuckle and all of his right fingers were fractured.
On April 18, 2025, an employee was cutting the lid off an empty 55-gallon drum using a plasma cutter. The drum originally contained a flammable liquid and residual liquid inside the drum ignited and exploded. The employee was hospitalized with burns to the face, chest, and arms.
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.
An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.