THERMAL SOLUTIONS PRODUCTS, LLC

An employee was spraying concrete sealer when they fell into a 3-foot drain hole. The employee landed on their feet and sustained a broken femur.

A temporary employee walked across a wooden pallet to retrieve product to stock. When he walked back across the pallet, it broke, causing the employee to fall to the ground and sustain a fractured hip.

On April 10, 2023, at 12:00 PM, an employee was using a broom to clear rock from a building's foundation in preparation for a spray-on vapor barrier. There was a 4-foot deep trench next to the building where the employee was working and the soil at the trench's edge fell away. The employee fell into the trench and was hospitalized for a left pelvis and/or femur fracture.

An employee was walking up a steel staircase to check wiring in the electrical room. The staircase had a top platform with a grate that was sitting across the beams of the platform. The grate had shifted and as the employee stepped on it, it gave way, causing him to fall approximately 3 feet to the ground below. The grate landed on the employee and he was hospitalized for four transverse process fractures in the lower spine.

An employee was stocking the freezer and stepped on a wood pallet. The employee's foot went into the pallet and they sustained a right ankle fracture that required hospitalization and surgery.

An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.

An employee was laying underneath a cooler block while jacking up the tie bar to secure it to horses when the cooler block fell off the horses and onto the employee, resulting in several fractures to the pelvis, clavicle, wrist and tailbone.

An employee was climbing a ladder on a water cooling tower when they fell approximately 15 to 20 feet to the ground, resulting in a fractured left elbow.

An employee was preparing to sand a metal shaft that was loaded into a lathe when his left arm became entangled in the machine. The employee sustained several broken bones.

An employee was removing the banding from a load of mechanical supports, when one fell forward onto his left leg. The employee sustained a laceration to the lower leg and was hospitalized.

An employee was closing a door when the door closed on their right index finger, resulting in a fingertip amputation.

An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.

An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.

An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.

An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.