HASTINGS, NEBRASKA—
A-1 FIBERGLASS INC.
Sudden start or stop, nonroadway · Soreness, pain, hurt-nonspecified injury
At a glance
Federal OSHA recorded a severe workplace injury at A-1 FIBERGLASS INC., 4495 S. GUNPOWDER CIRCLE, HASTINGS, NEBRASKA 68901 on — Soreness, pain, hurt-nonspecified injury, affecting the back, including spine, spinal cord, unspecified.
Final narrative
An employee was clearing snow using a skid loader. The loader's bucket hit something solid, causing the skid loader to stop abruptly. The employee's chest collided with the safety bar inside the loader, causing the employee to lose consciousness. He was hospitalized.
More severe injuries at A-1 FIBERGLASS INC.
HASTINGS, NEBRASKA—
A-1 FIBERGLASS INC.
An employee was driving a forklift on an unpaved road. The forklift left the road and tipped over in a ditch. The employee's legs were pinned under the forklift and sustained bruising.
View A-1 FIBERGLASS INC.'s full OSHA safety record →
Similar incidents · Same event type
ANNA, OHIO—
NK Parts
An employee was being trained to operate a yard truck to move trailers in and out of docks and to place them in storage areas. The employee was standing inside the yard truck cab as the trainer demonstrated how to operate the yard truck. As they performed a tug test, the truck jolted forward, causing the employee to sustain a lower back strain. The employee experienced numbness of the toes, bilateral leg weakness, and back pain that required hospitalization.
LEWISVILLE, TEXAS—
Busy B's Steel Erectors
An employee was in a boom lift when the vehicle struck a hole then stopped abruptly. The impact ejected the employee and his fall protection pulled him back into the basket. The employee possibly struck the basket and was hospitalized for a leg fracture that required surgery.
VALLEY CITY, OHIO—
Mack's Inc.
An employee was operating a three-wheeled forklift to hoist metal material with a sling system. While driving downhill in a gravel driveway, the front tire caught a root and the forklift lost momentum. This caused the hoisted material to sway and the forklift tipped forward. Inside the forklift, the employee struck against the dash and roof of the cage, sustaining a contusion to the forehead, abrasions to both legs, and later had a seizure.
LEBANON, OHIO—
Lebanon Lawn and Landscape
An employee was moving gravel with a skid steer. The skid steer lunged forward and the employee fell backward. The employee's feet were caught between the standing plate and the framing above it, and both ankles were broken.
MONTGOMERY, ALABAMA—
Newell Road Builders, Inc.
An employee was moving a bulldozer from one portion of the site to another. The bulldozer traveled over a mound of dirt. The blade got caught in the dirt on the opposite side of the mound and the dozer came to a sudden stop. The driver was propelled out of his seat and his head struck the top of the cab. The employee suffered two fractured vertebra and weakness in his right hand and leg.
More severe injuries in this industry (NAICS 325991)
FOLEY, ALABAMA—
Ascend Performance Materials Operations LLC
An employee was working to unclog a feeder that feeds raw material into an extruder to make plastic/polymer. The slide gate closed on his right hand, amputating three fingers between the first and second knuckles as well as cutting the thumb tip.
WADSWORTH, OHIO—
Radici Plastics USA Inc.
An employee was operating an overhead crane and using a hoist to lower a metal tipper bin. The tipper lowered onto their right hand, crushing their right thumb and resulting in a fingertip amputation.
AKRON, OHIO—
Advanced Cryogenic Enterprises, LLC
An employee was unclogging a granulator when the rotor pulled his fingers in. His left index, middle, and ring fingers, as well as his right thumb, index, middle, and ring fingers were amputated. The employee was hospitalized. The machine was not guarded at the time.
ASHLAND, WISCONSIN—
Deltco of Wisconsin, Inc.
On March 3, 2025, two employees were working on a blender. The injured employee was removing contaminated pellets from the blender. Another employee went to elevate a tilter that was feeding the blender when the blender auger activated and crushed the injured employee's left leg. The employee's leg was medically amputated 4" - 6" below the knee. The machine was guarded at the time.
FORT WORTH, TEXAS—
RTP COMPANY
An employee was performing maintenance on a pelletizer. When they rotated the drum, their left index finger became caught between the pelletizer blades and the bed, resulting in a fingertip amputation.
More severe injuries in NEBRASKA
NEBRASKA CITY, NEBRASKA—
Concrete Industries Nebraska City
An employee was stacking concrete blocks for a concrete bunker. As a block was swinging into place, the employee's left leg was pinched between two blocks, resulting in injuries to his left heel and lower leg.
OMAHA, NEBRASKA—
Elkhorn Mechanical and Combustion
An employee was climbing a ladder to inspect a vent in a restaurant dining area. The ladder slid out on the floor and the employee fell approximately 12 feet onto the ladder and the floor. He was hospitalized with a dislocated shoulder and a back injury.
LINCOLN, NEBRASKA—
4 Seasons Property Services, Inc.
An employee was rappelling down a tree. When he was most of the way down, he fell on the ground and suffered a broken pelvis.
KEARNEY, NEBRASKA—
Cellar Crew LLC
An employee was filtering a fryer with a fryer filter machine. After going around the corner and then returning to the fryers, the employee stepped into the filter machine. The hot oil burned the employee's right ankle, and the employee was hospitalized.
ELGIN, NEBRASKA—
BANB Farms Inc.
An employee was cleaning out corn from a grain bin. The sweep auger in the bin was activated and caught his trouser leg. His leg was pulled into the auger, which injured his calf and caused leg fractures and lacerations.