International Paper

An employee was tracking an infeed belt on a scrap hogger when their right arm was caught between the belt and a roller. The arm was broken and the employee's shoulder was dislocated. The employee was hospitalized.

An employee was working in the converting area installing a glue tote, and became ill from the heat. The employee sustained heat exhaustion.

An employee was repairing a chemical leak under an ultrasonic cleaning machine while lying on the ground. The employee had used water to identify the leak. The floor got wet and potentially activated the chemical, a solution used for cleaning anilox rolls. The employee sustained chemical burns to their right shoulder, right forearm, and right buttock.

An employee was clearing a jam inside a hogger machine. The employee's left hand came into contact with blades in the machine, resulting in hospitalization with a fractured left hand.

An employee was putting a machine back in service from being locked and tagged out. When the employee restarted the machine, hot water and broken down woodchips began to flow from the drain valve. The employee sustained first-and second-degree burns to both lower legs.

An employee was delivering mail when they tripped on a curb and fell to the ground, resulting in a kneecap injury.

An employee was leaving work when they tripped over a curb in the parking lot and fell into a wall, resulting in a fractured left humerus.

A nurse was visiting the home of a patient for requested treatment. She tripped on her gown while going up the steps to the property, falling and fracturing her left femur.

An employee tripped on a step while entering a house. The employee suffered a broken right femur and was hospitalized, requiring surgery.

An employee was walking up an escalator that was out of service when they tripped on a step, fell, and suffered a closed fracture to the right femur as well as a dislocated right patella.

On October 22, 2025, an employee was working to put a conveyor chain back on the track of a conveyor when their fingers were caught between the chain and the chain track, pulling their right hand into the sprocket. Four fingers were amputated.

An employee was cleaning the headers of the core machine using a hand drill with a brush attachment. His glove was caught on the brush shaft, resulting in amputation of the left middle fingertip.

An employee was operating a winder paper mill machine when their right index finger became caught in the machine. The finger was partially amputated at the first knuckle.

An employee was lubricating a chain and sprocket on a corrugator splicer. He lost his balance, and his right middle finger came into contact with the chain and sprocket. The fingertip was amputated at the nail bed.

An employee was entering a building and reached out to catch a closing door. The door closed on the employee's finger, resulting in the partial amputation of the fingertip and nailbed.

An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.

An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.

An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.

Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.

An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.