Contact with hot objects or substances · Heat (thermal) burns, unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at Niagara Bottling LLC, 217 Aquapenn Drive, HOWARD, PENNSYLVANIA 16841
on — Heat (thermal) burns, unspecified, affecting the multiple body parts, n.e.c..
Final narrative
While performing a clean-in-place procedure, an employee removed the nozzle of a hose to place the hose on piping when a valve opened and sprayed her with 185-degree hot, caustic water. The employee suffered burns to both arms, both legs, and her abdomen.
A mechanic was performing a modular overhaul on a blower. While removing magnetic rods for the stretch rod, the employee was placing the second rod on the blower platform. The rods were magnetically attracted to one another, and the employee's left third and fourth fingers were pinched between them. She was hospitalized and sustained a partial amputation.
An employee was clearing a piece of tape from the tape dispenser when their hand contacted the cutting implement on the dispenser. The employee suffered the amputation of their right index finger.
On September 4, 2023, maintenance staff were working on a 4-inch resin pipe for a silo. A ladder was used to lift and swing the pipe into the assembly. The pipe was tied off to the main lift with a rope. A technician prepared to shift the pipe into place when the injured employee walked over to ask a question. As the technician looked down, the pipe shifted and swung, striking the injured employee. The employee sustained a concussion.
An employee was changing the sawblade on a labeler. When he applied pressure as part of the installation, the blade cut through plastic sheathing and lacerated his right palm. He was hospitalized.
An employee connected a steam line to a hose to clean equipment when the fitting broke loose. They were struck by steam in the left inner thigh, resulting in burns that required hospitalization.
An employee was making tea when she noticed tea grinds were collecting on the side and water was no longer dripping through the funnel. The employee was checking the funnel when boiling water and tea grinds spilled onto the left side of her body. The employee sustained burns to her neck, back, and arm.
An employee had turned off the ball valve on a waterpipe system and was removing the plug when the coupling system attached to the strainer came apart. Hot water sprayed on his arm and back, resulting in first- and second-degree burns that required surgery.
An employee was using a shovel to remove waste vermiculite from molten zinc. The metal had been placed in a bin and partially hardened. The employee broke through the partially hardened metal; still-molten metal flowed to the employee's steel-toed right boot and entered through the cloth boot tongue. The employee suffered a third-degree burn to the right foot and was hospitalized.
More severe injuries in this industry (NAICS 312112)
A mechanic was performing a modular overhaul on a blower. While removing magnetic rods for the stretch rod, the employee was placing the second rod on the blower platform. The rods were magnetically attracted to one another, and the employee's left third and fourth fingers were pinched between them. She was hospitalized and sustained a partial amputation.
An employee was conducting maintenance on the bag in box (BIB) palletizer machine when the motor chain jumped, pulling his right index finger into the chain drive attached to the motor and causing a fingertip amputation.
An employee was clearing a piece of tape from the tape dispenser when their hand contacted the cutting implement on the dispenser. The employee suffered the amputation of their right index finger.
An employee was troubleshooting a bottle machine because the nozzle was stuck in the up position. The employee went to check for pre-blow air and the nozzle dropped back down to its starting position, catching his right index fingertip against the mold base. The employee sustained a fingertip amputation to the first digit.
An employee was attempting to clear a bottle jam when they were pinned to the wall by the arm of a robotic bottle stacker. The employee sustained an abdominal injury that required hospitalization. The machine was not guarded at the time.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.