Eldorado Artesian Springs, Inc

An employee was fixing the automated 5-gallon bottling machine that had an empty bottle jam. When the jam was fixed, the machine activated and pinned the employee's legs between the robotic arm and the bottle racks. The employee sustained fractures to both tibias.

An employee was working to build an electrical substation. He was cleaning out the inside of a fixed section of a PVC pipe on the end that was furthest from an excavator. The excavator was outside of the trench and more than 25 feet away when it moved a pipe, pinching the employee's right arm between the two pipes. The employee's forearm was fractured.

An employee was anchored to a movable piece of equipment called a "lid" with a self-retracting lifeline harness. An overhead crane lifted the equipment, causing the employee to be pulled by his harness. The employee was pulled off the walkway and swung over the wall of the kiln. His body and head struck the wall. The employee lost consciousness and sustained a laceration to the side of his head that required stitches. The employee also sustained multiple fractured ribs and fractured vertebrae.

An employee was in a scissor lift, preparing to strip formwork from the underside of a concrete deck. As the lift was ascending, the employee's left little finger was pinched between the lift rail and the concrete beam above. The employee was hospitalized, and the soft tissue of their left little fingertip was amputated; the finger's bony tuft was also damaged.

An employee was operating an order picker when his left middle finger was crushed between the lift and storage racking. The employee's fingertip was amputated.

An employee was ascending in a scissor lift when his left thumb was caught between between the railing of the lift and a piece of equipment installed in the ceiling. The employee's thumb tip was amputated.

A mechanic was performing a modular overhaul on a blower. While removing magnetic rods for the stretch rod, the employee was placing the second rod on the blower platform. The rods were magnetically attracted to one another, and the employee's left third and fourth fingers were pinched between them. She was hospitalized and sustained a partial amputation.

An employee was conducting maintenance on the bag in box (BIB) palletizer machine when the motor chain jumped, pulling his right index finger into the chain drive attached to the motor and causing a fingertip amputation.

An employee was clearing a piece of tape from the tape dispenser when their hand contacted the cutting implement on the dispenser. The employee suffered the amputation of their right index finger.

An employee was troubleshooting a bottle machine because the nozzle was stuck in the up position. The employee went to check for pre-blow air and the nozzle dropped back down to its starting position, catching his right index fingertip against the mold base. The employee sustained a fingertip amputation to the first digit.

An employee was tensioning the chain of a packing machine. The employee's right index finger was caught in the chain sprocket, and the fingertip was amputated.

An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.

An employee was cutting cabinet trim using a table saw when four fingers on his left hand were severed, resulting in hospitalization and amputation.

An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.

A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.

An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.