ABBOTT, TEXAS—
Probst Electric
Compressed or pinched by shifting objects or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury at Probst Electric, Intersection of County Road 3165 and 3210, ABBOTT, TEXAS 76621 on — Amputations, affecting the fingertip(s).
Final narrative
An employee was connecting an auger to a drill. The employee's right ring finger was caught in the pinch point between the auger and the hook on the service winch for the drill, causing a laceration to the finger and a partial amputation to the fingertip.
More severe injuries at Probst Electric
SUN VALLEY, IDAHO—
Probst Electric
On October 1, 2024, an employee was using a handheld electric crimping tool to connect two ends of a ground wire inside a switch cabinet. The employee's finger became caught in the crimping tool when it closed. The employee was hospitalized and sustained a complete transphalangeal amputation of their right middle finger.
WHITEWOOD, SOUTH DAKOTA—
Probst Electric
An employee was preparing a foundation drill. His thumb was caught between two pieces of metal and partially amputated.
CRAWFORD, NEBRASKA—
Probst Electric
An employee was struck by a forklift that was backing into position. The employee suffered a fractured lower right leg.
MONTROSE, COLORADO—
Probst Electric
A transmission pole was in a 42-inch diameter hole that was being backfilled. An employee slipped into the hole and suffered an ankle dislocation.
View Probst Electric's full OSHA safety record →
Similar incidents · Same event type
MECHANICSBURG, PENNSYLVANIA—
TForce Freight
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
DELAWARE CITY, DELAWARE—
Liveo Research, Inc.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
FORT WORTH, TEXAS—
Best Pump and Flow
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
BUFFALO, NEW YORK—
FORD MOTOR COMPANY
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
UNADILLA, GEORGIA—
Lasseter Tractor Company. Inc.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 221121)
SALMON, IDAHO—
QB Corporation
An employee was performing troubleshooting and maintenance on one of the generators that feed the RF line for glue-laminated timber (glulam) beam production. He was reattaching the outer panel of the generator. A circuit was completed and the employee was electrocuted by the generator and sustained burns. The employee was hospitalized.
PECOS, TEXAS—
Oncor Electric Delivery Company, LLC
An employee was utilizing a utility task vehicle (UTV) to patrol a 138 kV transmission line in a right-of-way. The UTV drove into a washout hole that was approximately 6 feet deep and obstructed by vegetation. The employee sustained a dislocated shoulder, a fractured left humerus, back pain, and a strained ankle. He was hospitalized.
CUSHING, MAINE—
Central Maine Power Company
A crew of employees were working to replace a utility pole that was broken by a motor vehicle accident. As the crew was removing equipment from the broken pole, part of the pole broke, fell on the injured employee, and rolled over him. The employee sustained two broken shoulders, multiple broken ribs, and a damaged lung that required hospitalization and surgery.
SPARTA, ILLINOIS—
Ameren Illinois - Sparta Operating Center
An Ameren lineman was making secondary voltage connections in a pad-mounted residential feed transformer. The lineman contacted an energized lead bushing, sustained an electrical shock, and was hospitalized.
BLACKSHEAR, GEORGIA—
Satilla EMC
An employee was checking voltage on a meter. There was an arc flash, and the employee suffered burns to both hands.
More severe injuries in TEXAS
EAST BERNARD, TEXAS—
T G Meat Center LLC
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
LUBBOCK, TEXAS—
Professional Flooring Supply
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
HOOKS, TEXAS—
EnviroSafe Demil LLC
An employee was inspecting flares processes. The employee received burns to the front side of the body, face and arm from the flares.
LOLITA, TEXAS—
Inteplast Group
An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.
HALLETTSVILLE, TEXAS—
Regency IHS of Fairwinds Halletsville, LLC
An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.