Caught in running equipment or machinery during maintenance, cleaning · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Goodyear Tire & Rubber Company, 1 Southwest Goodyear Boulevard, LAWTON, OKLAHOMA 73505
on — Fractures, affecting the finger(s), fingernail(s), unspecified.
Final narrative
An employee was trying to clear a jam in an extruder. The extruder crushed the employee's right hand and broke the employee's right thumb.
An employee was operating a flat press on a monorail when his fingertip was caught between a barrier for the pond and a handle on the machine. The employee sustained a fingertip amputation.
An employee was pulling a metal skid off a stack to place the skid on the floor. The weight of the skid shifted and the edge caught the employee's right middle finger, resulting in a partial amputation.
An employee was driving a pickup truck and reached to open a nearby gate while in the vehicle. The gas pedal was pressed and the employee's right arm was caught between the gate and pickup truck door, resulting in a forearm fracture.
A Goodyear employee was replacing a steer tire on a semi truck on an interstate highway. A vehicle struck the back of the Goodyear truck, which in turn struck the employee. The employee suffered multiple injuries and was hospitalized, undergoing surgery.
An employee was feeding rubber into a rubber mill machine when his glove became stuck on the rubber. His gloved hand was then pulled into the rollers, partially amputating his left thumb tip and the second joint of his left index finger.
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 326211)
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
An employee was adjusting a pallet on a conveyor when it came off the conveyor and struck his right ankle, breaking the tibia and fibula. The employee was hospitalized.
At 2:45 p.m., an employee was outside the plant during a break before his next shift. He was speaking with an associate when he suddenly fell from the third-level steps to the ground, striking his head on the concrete. The employee was hospitalized due to internal brain bleeding, a wound to the back of his head requiring staples, and heat-related dehydration.
Two employees were replacing a motor on an overhead conveyor. The old motor fell to the floor, causing a piece of the concrete floor to fly up and strike the injured employee in the face, around the eye. The injured employee sustained a right orbital fracture, a zygomatic arch fracture, and a sphenoid fracture. The employee was hospitalized and required surgery.
An employee was changing the bladder on a hydraulic press. As he lowered the bladder, his left foot was pinned between its bottom ring and the bottom mold of the press. The second toe on the foot was amputated.
An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.
An employee was working in the food service warehouse when he experienced chest pain, difficulty breathing, and lost consciousness. The employee sustained carbon monoxide poisoning.
An employee was cutting a piece of metal rod with a metal cutting machine. His right middle finger became caught between the rod and the machine's table. The employee's fingertip was partially amputated.
An employee was working at her desk. She went to stand up and fell to the floor beside the desk. The employee sustained a hip displacement and required surgery.
An employee was processing wood boards at a chop saw when the saw malfunctioned and the blade cut her left hand and fingers. She was hospitalized and her little finger was surgically amputated.