READING, PENNSYLVANIA—
Carpenter Technology Corporation
Other fall to lower level 16 to 20 feet · Fractures and other injuries, n.e.c.
At a glance
Federal OSHA recorded a severe workplace injury at Carpenter Technology Corporation, 101 West Bern Street, READING, PENNSYLVANIA 19601 on — Fractures and other injuries, n.e.c., affecting the multiple body parts, unspecified.
Final narrative
An employee was standing at the edge of the furnace pit and was going to push out the lining on the furnace. The employee fell approximately 20 feet into the furnace tank and sustained broken vertebrae, two broken ribs, and a brain bleed. The employee was not wearing fall protection at the time of the fall.
More severe injuries at Carpenter Technology Corporation
READING, PENNSYLVANIA—
Carpenter Technology Corporation
An employee was walking across a foot bridge at the workplace. They rolled their right ankle on the transition between the bridge and the ground and fractured it.
READING, PENNSYLVANIA—
Carpenter Technology Corporation
An employee was working at the strip metal processing machine (wet (oil) process). The employee used a rag in their right hand to clean a roller and three fingers were caught in a nip point, resulting in amputation of their right thumb tip as well as their index and middle fingertips. The machine was not guarded and running at the time.
WASHINGTON, PENNSYLVANIA—
Carpenter Technology Corporation
An employee was performing a head change on the bar turner machine when the pinch rolls closed and the bar lifted, pinching the injured employee's left index finger between the bar and the rest. The employee sustained a fingertip amputation.
READING, PENNSYLVANIA—
Carpenter Technology Corporation
The injured employee was operating a straddle carrier to transfer a load to the billet yard. When they turned left into the billet yard, the straddle caught fire. The employee stopped the vehicle and jumped approximately 6-8 feet to the ground. The employee sustained first- and second-degree burns to the head, face, and arms, and a fractured right leg.
READING, PENNSYLVANIA—
Carpenter Technology Corporation
An employee was preparing to move a 2,800-pound mold using a sling lifting chain and overhead crane to insert a mold plug. Once the end of the mold was 12 to 16 inches from the floor, the employee stopped the crane and moved to insert the mold plug into the mold. The mold slipped out of the chains onto the employee's left foot, causing crush injuries to the first and second toes. The employee was hospitalized.
View Carpenter Technology Corporation's full OSHA safety record →
Similar incidents · Same event type
NEW CASTLE, DELAWARE—
P&C Roofing, Inc.
An employee was transitioning from a ladder onto a roof when the ladder slipped and they fell approximately 20 feet to the ground. The employee was hospitalized with fractures to their pelvis and heel.
SANIBEL, FLORIDA—
Melvin Sipaque
An employee was tearing down shingles when they fell approximately 18 feet from a roof to the ground, sustaining a broken ankle.
NORMAN, OKLAHOMA—
All Seasons Roofing & Construction Inc
An employee was climbing a ladder to bring material onto a roof. The ladder slid and the employee fell 16 feet to the ground, resulting in a broken knee.
BOGART, GEORGIA—
Caterpillar, Inc.
An employee was performing an inspection of a bridge crane while working from a 19-foot scissor lift. The employee was going to use a pendant to move the crane to access a different portion of the crane for visual inspection. The scissor lift guard rails were below the girder of the crane to avoid contact. The tow arm for the crane collectors contacted the guardrail of the scissor lift and caused it to tip over. The employee stayed inside the scissor lift basket as he fell to the floor. The employee sustained fractures to the right arm and hip.
KANSAS CITY, MISSOURI—
Advantage Solutions
An employee was on a forklift that was elevated approximately 20 feet and was auditing inventory. The forklift malfunctioned and the employee fell down to the surface below, causing them to sustain multiple fractures.
More severe injuries in this industry (NAICS 331111)
NORTH JACKSON, OHIO—
Universal Stainless & Alloy Products Inc.
An employee used a crane to set down a bar. The bar measured 9 inches by 16 feet. The strap got stuck under the bar, and the employee asked another employee to jog the roll. The bar rolled and pinched the injured employee's left hand, resulting in a fingertip amputation.
MOUNT PLEASANT, TEXAS—
Priefert Manufacturing
An employee was loading a steel forming machine with steel to be processed. He went to move a cooling hose out of the way and his left thumb was crushed by the forming roller, resulting in injuries that required surgical amputation.
PUEBLO, COLORADO—
CF&I Steel L.P.
An employee was advancing a rail to line up for welding with a secondary rail on the weld line when his right middle and ring fingers were caught between the rails. The employee sustained an amputation to the top knuckle of the middle finger and a fracture to the ring finger. The machine was guarded at the time.
BRADDOCK, PENNSYLVANIA—
United States Steel Corporation
An employee was working near molten metal and experienced heat illness symptoms including cramps. The employee was hospitalized.
TAMPA, FLORIDA—
Tampa Bay Steel, LLC
An employee was preparing bundles of 24-foot square metal tubing to be loaded onto a truck and cut the safety band for a bundle. While the employee was removing a piece of dunnage from a bundle, they bumped the bundle with their leg. The metal tubing then fell forward and struck the employee, causing a fractured left ankle.
More severe injuries in PENNSYLVANIA
WYNNEWOOD, PENNSYLVANIA—
Main Line Clinical Labs
An employee was closing a door when the door closed on their right index finger, resulting in a fingertip amputation.
POCONO SUMMIT, PENNSYLVANIA—
Ardent Mills
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
LANCASTER, PENNSYLVANIA—
Zimmerman & Herr
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
EBENSBURG, PENNSYLVANIA—
McAneny Brothers, Inc.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
PITTSBURGH, PENNSYLVANIA—
Metz Culinary Management LLC
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.