Jetro Holdings, LLC

To help move cardboard boxes, an employee used a lift machine to move the pallets storing the boxes. He exited the lift while it was still in motion and his hand was caught between the back of the lift and a yellow bin. He was hospitalized with a broken/bruised right thumb/palm.

An employee was operating a reach forklift in an aisle that had been blocked off with a safety barrier. A customer went under the safety barrier and walked in front of the forklift to grab a case of mayonnaise. The employee tried to step off the forklift, but his shirt got stuck on the drive handle. The forklift then accelerated into steel pallet racking and the employee was pinned between the rack and the forklift. The employee sustained a fractured pelvis.

An employee fell to the ground while climbing onto the driver's seat of a box truck, suffering a head injury.

An employee held a beam while driving a forklift in the warehouse. He lost control and injured his left hand.

An employee being trained on pallet-jack operation crashed against pallets.

An employee was walking back to her workstation. A forklift reversed a short distance, then completed a U-turn and struck her, running over her lower extremities. She was hospitalized with a broken ankle.

An employee was training on a jockey truck. Upon stepping out of the truck, the employee was struck by a rubber tire gantry crane, resulting in amputations of the right leg above the knee and left leg below the knee.

An employee was standing at the rear of a double pallet jack. Another double jack approached, and the employee's lower leg was caught between the two pieces of equipment. He suffered a broken tibia and fibula.

An employee was unloading large material bags on a loading dock. A forklift tine pinned the employee's foot against a pallet, causing the employee to fall and suffer a broken ankle.

An employee was pushing a container when they were struck by a forklift. The employee sustained a left leg fracture.

An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.

An employee was operating a reach truck and was coming around corner when the vehicle struck a warehouse rack. The employee's left foot got caught between the forklift and the rack. The employee was hospitalized with fractured toes.

An employee was walking down an exterior concrete stairway. She lost her footing, fell to the concrete, and suffered a compound fracture to the right ankle. She was hospitalized, requiring surgery.

An employee placed a box in the driving cage of a forklift to move it from one side of the warehouse to the other. As the employee approached the back portion of the area, the box shifted and hit the controls, causing the forklift to move toward the warehouse wall. The employee lost their balance, caught themselves, and stepped down off the forklift. The forklift continued and struck the wall, pinning their left leg/ankle against the wall. The employee moved the forklift forward and then fell to the floor, sustaining injuries to their leg and foot.

An employee was walking in the parking lot from their car to the front door when they slipped on ice and fell, resulting in an arm fracture.

An employee was checking on a machine outside of the building and removed a cover to clean out a blocked area. His hand was caught by a rotary valve in a dust collection machine. The employee's fingertip was amputated.

An employee was working to clean a glue roller with a scraper tool. The tool and the employee's left thumb were pinched between two rollers, resulting in a partial amputation.

An employee was re-arranging boxes of pipe insulation on a pallet. One of the boxes fell from the pallet and knocked over an upright empty cylinder. The cylinder fell and crushed the tip of the employee's right toe. The employee's toe required surgical amputation.

An employee was securing the claw of a grapple truck to the truck bed. His left little finger was caught between the tie down strap and the rub rail of the truck, resulting in partial amputation of the finger.

An employee was cutting extruded aluminum framing material using a horizontal band saw. She went to grab a rag in the machine when the rag contacted the blade and pulled her hand in toward the blade, resulting in a partial amputation of the right index finger.