Caught in running equipment or machinery during regular operation · Crushing injuries
At a glance
Federal OSHA recorded a severe workplace injury
at Aberdeen Road Company, 105 East Sinking Springs Lane, EMIGSVILLE, PENNSYLVANIA 17318
on — Crushing injuries, affecting the arm(s), unspecified.
Final narrative
An employee was operating a laminated fabric machine when their left arm was pulled into the winder causing a crushing injury.
HospitalizedArm(s), unspecifiedSpecial process machinery, n.e.c.
An employee was using a laminator machine to make a splice. The splice began coming apart and the employee reached for it, resulting in a crush injury and fractures to the right arm. The employee was hospitalized and had surgery.
While running vinyl through rollers, an employee noticed the vinyl was building up. The employee was wiping the roller with a rag when the employee's right hand was pulled and burned between the rollers.
An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.
An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 313320)
An employee was walking by a lathe machine when his left hand got caught in a roller of the lathe machine. The employee sustained amputations involving the last two digits of the left hand and partial amputation of the middle finger.
An employee was cleaning the nip roller and setting up/operating a laminating machine when their left hand was caught in the machine and crushed. The employee sustained the amputation of their middle, ring, and little fingers. The machine was not locked out/tagged out at the time.
An employee was working at a coating/printing wind-up station when his right arm was caught in the machine. He suffered multiple fractures to the arm, including a compound fracture.
An employee used a forklift to lift an electric pallet jack so they could diagnose a problem with the pallet jack. The pallet jack fell off the forklift forks and struck the employee. He sustained fractures to the ribs and pelvis. He also fell, landing on a stack of pallets which fractured his left forearm.
An employee was cleaning debris from a machine when their left hand was caught in the in-going nip point. The employee sustained fractures and a crush injury to fingers of the left hand.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.