Caught in running equipment or machinery, unspecified · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Aberdeen Road Company, 105 East Sinking Springs Lane, EMIGSVILLE, PENNSYLVANIA 17318
on — Fractures, affecting the arm(s), unspecified.
Final narrative
An employee was changing out a laminate roll in the laminator machine when their arm was caught in the roller and fractured.
HospitalizedArm(s), unspecifiedTextile, apparel, leather production machinery, n.e.c.
An employee was using a laminator machine to make a splice. The splice began coming apart and the employee reached for it, resulting in a crush injury and fractures to the right arm. The employee was hospitalized and had surgery.
While running vinyl through rollers, an employee noticed the vinyl was building up. The employee was wiping the roller with a rag when the employee's right hand was pulled and burned between the rollers.
On December 19, 2023, an employee was setting up a copper wire drawing machine when his left ring finger was pinched between a copper wire and a machine part. The employee's finger was partially amputated.
An employee was checking the gusset seal on a machine. He moved to the next cross sealer and the machine activated, causing an amputation to a left-hand finger. The employee was hospitalized.
An employee was evaluating a coiling machine to verify that the blade was present inside it. The machine's weld function was activated, and the machine crushed the employee's fingers, resulting in the amputation of the left middle and ring fingers.
An employee was walking by a lathe machine when his left hand got caught in a roller of the lathe machine. The employee sustained amputations involving the last two digits of the left hand and partial amputation of the middle finger.
An employee was cleaning the nip roller and setting up/operating a laminating machine when their left hand was caught in the machine and crushed. The employee sustained the amputation of their middle, ring, and little fingers. The machine was not locked out/tagged out at the time.
An employee was working at a coating/printing wind-up station when his right arm was caught in the machine. He suffered multiple fractures to the arm, including a compound fracture.
An employee used a forklift to lift an electric pallet jack so they could diagnose a problem with the pallet jack. The pallet jack fell off the forklift forks and struck the employee. He sustained fractures to the ribs and pelvis. He also fell, landing on a stack of pallets which fractured his left forearm.
An employee was cleaning debris from a machine when their left hand was caught in the in-going nip point. The employee sustained fractures and a crush injury to fingers of the left hand.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.