Caught in running equipment or machinery during maintenance, cleaning · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at East Penn Manufacturing Company, Incorporated, 102 Deka Road, LYON STATION, PENNSYLVANIA 19536
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
An employee was clearing a jam on a battery machine when their finger got caught between the machine and a battery case. The employee sustained a finger amputation.
AmputationFinger(s), fingernail(s), n.e.c.Special process machinery, n.e.c.
More severe injuries at East Penn Manufacturing Company, Incorporated
An employee was recycling material by adding it to a molten lead pot. The employee came in contact with the molten lead and suffered burns to the lower back and shoulder.
An employee was about 4 feet up an 8-foot A-frame ladder, working on an overhead pipe. The employee's wrench slipped and they fell from the ladder. The employee suffered spiral fractures to the left tibia and fibula.
An employee fell from a powered industrial truck to the floor after colliding with a stack of material. The employee suffered a back injury and broken hip.
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 335911)
An employee was operating material handling equipment when their right foot was caught between the material handling equipment and a railing. The employee sustained fractures to the big toe and second toe.
An employee was operating a forklift when it collided with another forklift at an intersection. The employee suffered a broken lower right leg from a rack of battery plates on the forks of the other truck.
Four employees were moving a 400-pound flange to the ground when part of the load was released and the injured employee's hand became caught between the flange and the ground. The employee sustained a left middle fingertip amputation.
An employee was recycling material by adding it to a molten lead pot. The employee came in contact with the molten lead and suffered burns to the lower back and shoulder.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.