Caught in running equipment or machinery during regular operation · Burns and other injuries, n.e.c.
At a glance
Federal OSHA recorded a severe workplace injury
at East Penn Manufacturing Company, Incorporated, 102 Deka Road, LYON STATION, PENNSYLVANIA 19536
on — Burns and other injuries, n.e.c., affecting the finger(s), fingernail(s), unspecified.
Final narrative
An employee was casting a cable when the mold malfunctioned and closed on the employee's thumb. They sustained a burn and crush injury.
An employee was recycling material by adding it to a molten lead pot. The employee came in contact with the molten lead and suffered burns to the lower back and shoulder.
An employee was about 4 feet up an 8-foot A-frame ladder, working on an overhead pipe. The employee's wrench slipped and they fell from the ladder. The employee suffered spiral fractures to the left tibia and fibula.
An employee was clearing a jam on a battery machine when their finger got caught between the machine and a battery case. The employee sustained a finger amputation.
An employee fell from a powered industrial truck to the floor after colliding with a stack of material. The employee suffered a back injury and broken hip.
An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.
An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 335911)
An employee was operating material handling equipment when their right foot was caught between the material handling equipment and a railing. The employee sustained fractures to the big toe and second toe.
An employee was operating a forklift when it collided with another forklift at an intersection. The employee suffered a broken lower right leg from a rack of battery plates on the forks of the other truck.
Four employees were moving a 400-pound flange to the ground when part of the load was released and the injured employee's hand became caught between the flange and the ground. The employee sustained a left middle fingertip amputation.
An employee was recycling material by adding it to a molten lead pot. The employee came in contact with the molten lead and suffered burns to the lower back and shoulder.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.