105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Novinium, Inc.

Indirect exposure to electricity, unspecified · Electrical burns, unspecified

Federal OSHA recorded a severe workplace injury at Novinium, Inc., 13230 Dillon St, BRIGHTON, COLORADO 80601 on — Electrical burns, unspecified, affecting the hand(s), unspecified.

Watch Novinium, Inc. — free Get an email when a new federal OSHA severe-injury report for Novinium, Inc. is published. One employer, no account, unsubscribe in one click.

An employee was assisting a crew in de-energizing a radial section of cable. The employee was switching cables to isolate a section he was working on when a probe contacted a cable, resulting in a shock and burns to both hands.

Hospitalized Hand(s), unspecified Handtools-power not determined, n.e.c.

Novinium, Inc.

An employee was climbing down into a vault when they grabbed onto some doors on the vault and the doors gave way, causing the employee to fall at least 20 feet to the bottom of the vault, which had capped rebar on it. The employee suffered broken ribs and a broken sternum.

Novinium, Inc

After test leads were attached to an energized cable, a flash burned an employee's face and hands. The employee was hospitalized.

Novinium, Inc.

An employee was removing an injection bottle from a riser pole using an extended fiberglass pole when he felt a strain in his chest.

Novinium Inc.

An employee was standing on a flat bed truck while a transformer was being loaded onto it with a sky lift. Outriggers were not used at the time. The sky lift tipped over and struck the employee on the head causing a laceration to the ear and abrasions to an arm and leg. The employee was hospitalized.

Novinium, Inc.

An employee was doing maintenance on an electrical transformer when he contacted energized equipment, suffering third degree burns on his left hand.

View Novinium, Inc.'s full OSHA safety record →

AAXIOM CONCRETE SAWING, LLC

An employee was coring a concrete slab when their drill contacted a live electrical conduit. The employee suffered an electrical shock.

D-T Steel Inc

An employee was welding clips onto the end of the bridging of a wall, then installing bolts through the clips to the wall. As the employee lowered his rod holder down into the lift basket, the rod contacted the basket and energized it. As the employee leaned forward, they contacted the basket and grounded joist, resulting in first- and second-degree electrical burns to the stomach, back, and arms.

High Country Line Construction Inc

An employee was on the ground preparing to receive a wire stringing steel rope being flown by a helicopter. The employee grabbed the steel line and was shocked by electricity from the line on his right hand. The employee was hospitalized and required surgery for nerve damage to his hand.

Ernest P. Breaux Electrical, Inc.

An employee was pulling a line through a light pole when it contacted an uninsulated line. The employee was shocked and sustained burns that required hospitalization.

West Penn Power

An employee was in a bucket truck drilling a hole into a utility pole when a conductor located above the employee broke free from the pole and fell onto the equipment. The employee suffered second-degree burns to the right side of their face.

American Electric Power Company

An employee was setting up communication equipment for a meeting. They were walking and tripped over a speaker on the ground. The employee sustained a leg injury.

Cherokee Electric Cooperative

An employee (a lineman) was working to restore power by installing a hand line when he contacted a high-voltage device (7,200 volts), resulting in electrical burns to his upper body and hands.

Centerpoint Energy Houston Electric, LLC

A chain sling failed while a utility pole was being removed. A chain link struck an employee who was operating a front-end loader, puncturing the employee's chest.

Public Service Electric & Gas

An employee was working with an underground crew to troubleshoot a BUD failure. The employee was removing a fuse from the fuse holder when the fuse blew on the riser and an arc flash occurred. The employee was hospitalized with burns to his face, nose, lips, and neck.

Bright Star Solutions, Inc

An employee was connecting two wires when his rubber insulated gloves failed and he suffered an electric shock to his right hand, resulting in an electrical burn.

ABC Supply Company

An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.

Burke Builders Inc

An employee was cutting cabinet trim using a table saw when four fingers on his left hand were severed, resulting in hospitalization and amputation.

Circle Graphics, Inc.

An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.

FLATIRON CONSTRUCTION CORP.

A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.

Takkion OPS Management

An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.