Injured by slipping or swinging object held by injured worker · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Lowes Home Centers, LLC, 4455 South Buckley Road, AURORA, COLORADO 80015
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
An employee was using a circular saw to cut a 4x4 post when the saw blade contacted his left middle finger, resulting in an amputation of approximately 40% of the finger.
On 9/5/2020, at approximately 10:40 a.m., a Lowe's employee was making a delivery at a customer's home. The employee had positioned a washer on the lift gate of the delivery truck and was attempting to step around the washer when he fell off the lift gate, which was raised several feet off the ground. As the employee fell, he grabbed the washer and pulled it down on top of him. The washer landed on his abdomen. He was hospitalized with fractured ribs, a fractured C7 vertebra, and a head injury.
An employee had been retrieving a one-gallon pail of paint from a shelf. While descending a three-step step ladder, the employee fell from the second step to the floor and sustained a broken hip.
The injured employee was helping a co-worker unpack a front load washer in the main drive aisle between appliances and plumbing. The injured employee went to step backwards and tripped. He fell backwards and landed flat on his back and his head struck the floor. He sustained a suspected brain bleed and concussion.
A cashier was using three buckets stacked upside down as a step stool to install a flat cardboard box over the cashier's register hut's roof to keep the sun out. The buckets tipped over, causing her to fall about 2 feet to the ground. She suffered a broken right leg and was hospitalized.
An employee was using a saw to cut a piece of concrete when the piece gave way and pushed the saw into the employee's leg. The employee's leg was lacerated, requiring stitches and hospitalization.
An employee was grinding some hardfacing on a bulldozer blade when the 9-inch grinder kicked back and lacerated his left leg above the knee. The employee was hospitalized and required surgery.
An employee was operating a rotating tool to place thread protectors on the end of pipe. Her left hand was on the rotating part of the tool when the tool engaged, resulting in a left forearm fracture and a thumb laceration.
More severe injuries in this industry (NAICS 444110)
The injured employee was walking through the warehouse. Another associate was driving a forklift with a pallet of large format tile (slabs) when the slabs began to tip. The injured employee ran over to stop the slabs from falling, but the slabs fell on his lower left leg/foot. The employee sustained fractures in his lower leg and foot. He was hospitalized and required surgery.
An employee was doing a cutback on a piece of lumber using a chop saw. The saw hit a knot, the piece of lumber buckled, then kicked back and broke the kickback guard. The board was then pulled back into the blade, which lacerated the employee's left index and middle fingers.
On October 16, 2025, an employee was entering a parking lot after completing their work shift when they were struck by a vehicle being operated by a customer. The employee fell backward from the impact and the back of their head struck the asphalt. The employee was hospitalized due to brain bleed and a skull fracture.
On September 24, 2025, an employee was using a sledgehammer to straighten the forks on a forklift when a piece of metal broke off the fork and became lodged in the employee's leg. The employee was hospitalized.
An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.
An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.
A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.
An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.