Non-Ferrous Extrusion

The employee was on top of a rail car to level the grain that was deposited into the car when they fell 13-15 feet to the ground. The employee sustained a right leg fracture.

An employee was on an extension ladder installing a satellite dish on a roof when they fell approximately 12-15 feet to the ground. The employee sustained fractures.

An employee was setting a 5-foot pry bar into a precast concrete slab and stood on the end of the pry bar to move the slab into place. The pry bar slipped out causing the employee to fall backward 15.5 feet to the dirt ground. The employee was hospitalized with a broken leg.

An employee was on a step ladder to measure and mark a crane rail for modification. The employee fell approximately 12 to 15 feet to the ground, resulting in a fractured right hip.

An employee was on a trailer securing a load of logs when they fell approximately 9-12 feet to the ground. The employee sustained brain hemorrhaging and lacerations to the thigh and above the eye. The employee was hospitalized.

An employee was conducting preventative maintenance on an extrusion press and using an impact wrench to remove rivets on the shear cylinder. When the last rivet was removed, the stored energy in the cylinder released and dropped it onto the employee's hand. Their right thumb was caught between the cylinder and the casing of the rivet gun, resulting in crushing injuries. The employee sustained an amputation of the thumb without bone loss. The machine was locked out/tagged out at the time.

An employee was operating a gasoline-powered pump to remove water from the ground floor sump of a storage building. The pump became blocked and overheated. The employee was removing the blockage when he was sprayed with hot mud and steam, resulting in first- and second-degree burns to his right hand and left wrist, as well as a third-degree burn to the underside of the left wrist.

An employee was working at an oven in a foundry. When he closed the oven, its door closed on his left index finger. The finger was amputated.

An employee was pinned between port blocks and a forklift, resulting in fractures to the right tibia and fibula.

An employee stepped on the lip of a deck plate and his foot slipped into a pot of ore, resulting in burns to the lower left ankle and foot. The employee was hospitalized.

After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.

An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.

An employee was inspecting flares processes. The employee received burns to the front side of the body, face and arm from the flares.

An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.

An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.