Contact with objects and equipment, unspecified · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Gates Corporation, 909 Gates Street, RED BAY, ALABAMA 35582
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
A maintenance employee was replacing a roller adjuster on a piece of equipment and was attempting to remove a bearing from the left side of a solid steel shaft. The right end of the shaft slipped out of its bearing and dropped suddenly. The left end of the shaft then moved in an upward direction and pinched his left thumb between the bearing and the machine frame, resulting in amputation of the fingertip and nail.
AmputationFinger(s), fingernail(s), n.e.c.Machine and appliance parts, n.e.c.
Two maintenance technicians were changing out drive belts on the south end of the vulcanizing vessel. To check the proper function of the drive belts, the technicians manually cycled the cars into and then out of the vessel. One technician was manually cycling the vessel back out and the injured technician was inspecting the belts and checking the tension. The injured technician's right index finger was pinched between the belt and the pulley, resulting in an amputation of the distal phalanx.
An employee was cleaning a mandrel shaft with an emery cloth when their glove became caught on the rotating shaft. Their right hand was pulled in with the glove and their thumb was amputated.
On February 20, 2024, at approximately 6:30 a.m., an employee was unjamming rubber that had become stuck in a machine. When the machine started, the flapper moved, striking and compressing the employee. The employee was hospitalized for three fractured ribs, a partially collapsed lung, and a puncture wound in the middle of their back.
An employee was operating a hose/bender machine. He was reaching to adjust a piece of hose and got caught in a pinch point, sustaining an amputation to his finger.
On 8/9/2023, an employee was pressure washing a mandrel shell when the pressurized mixture lacerated their right hand near the thumb. The employee was hospitalized.
Two employees were struck by the rotary table of a drilling rig while installing caisson. Employee 1 suffered multiple fractures, internal injuries, and head trauma. Employee 2 suffered multiple fractures, internal injuries, spinal injury, and head trauma.
Employees were felling hazard trees. The injured employee was conducting 'bucking' operations to saw a tree from the road when the tree kicked-back, pinning him against the ground and fracturing his left femur. The employee was hospitalized and required surgery.
An employee was chaining a vehicle when he had to change tools and the compressor. As the compressor was being charged, the employee stepped near the vehicle to make sure the compressor was attached. Then, he instructed a co-worker to lower the compressor. His right hand was on the compressor and under the chain, causing his ring finger to be crushed.
More severe injuries in this industry (NAICS 326220)
An employee was preparing to cut rubber stock on a pneumatic cutting machine when their middle and ring fingertips were amputated by the cutting blade.
At about 12:25 a.m. on September 3, 2025, an employee was troubleshooting a malfunction involving a slitter whose arbor was not rotating as expected. The employee was observing the slitter's operations when the arbor completed its cycle and the employee's right index finger was drawn into the slitter's 4-inch, non-rotating cutting blade. The fingertip was amputated.
An employee was operating a rolling rope machine. Tooling fell out of the machine and landed on the employee's foot, breaking bones. The machine was not guarded at the time.
An employee was operating a machine when hot air and water was released. The employee sustained burns to the neck, back, buttocks and leg on the right side.
An employee was traveling down the maintenance aisle of a warehouse on a single-pallet front rider jack. The jack malfunctioned, causing the brakes to apply; the employee fell forward onto the concrete warehouse floor. The employee suffered an injury to the left leg and was hospitalized, requiring surgery.
An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.
An employee was directing a truck driver to a dump site when the truck's peanut trailer slipped off the kingpin. As the trailer fell, a ladder attached to it lacerated the employee's ear. The employee was hospitalized.
An employee was unloading a forklift from a trailer to the ground. The employee was climbing down the ladder of the trailer when their foot slipped through one of the rungs, causing them to fall backward onto the forklift forks. The employee was hospitalized for fractured ribs.