A-1 Block Corporation

An employee was operating a pattern block roller machine. The employee was pinned (at the mid- to upper torso) between the pusher bar and the assembly platform. The employee suffered broken ribs.

An employee was preparing to wash out a concrete mixer truck. When the water was turned on, the employee lost balance and fell into the corner of the top rail. The bolt securing the rail failed and the employee fell approximately 7.5 feet, injuring his left knee.

An employee was removing a pallet jam from a block machine when the machine's chain and sprocket amputated his right middle fingertip. The machine was not locked/tagged out at the time of the incident.

An employee was climbing a step ladder while carrying a 3-foot piece of conduit. As he went to reposition his feet on the ladder by pivoting, he slipped and fell from the third rung of a 6-foot ladder. The employee sustained fractures to the left femur, right elbow, and right ring finger.

An employee was descending a 4-step maintenance stand when she missed the bottom step and fell to the hangar floor. The employee suffered a left hip fracture.

An employee stopped a belt and was going to check it for missing packages. She fell backward 3-4 feet from an elevated platform and sustained a broken right arm.

An employee had just finished a routine concrete pour and was ascending the ladder to clean the concrete mixer truck. The employee lost their grip and fell approximately 2-3 feet, contacting the truck's bumper. The employee suffered rib fractures and a punctured lung.

An employee was performing duties as an expeditor. After opening the dock door, the employee scanned the barcode on the door of the truck and placed one foot on the truck and one foot on the dock. The truck drove out of the stall, causing the employee to fall 4 feet off the dock onto the concrete. The employee sustained fractures to the right side of the pelvis, elbow, and a left ring fingertip as well as injuries to the right wrist and bruising to the back and stomach.

On September 30, 2025, an employee was applying production labels to a splintered piece of pallet on a conveyor. Their right middle finger was caught as the split line exit conveyor moved forward, resulting in an amputation.

An employee was operating a pattern block roller machine. The employee was pinned (at the mid- to upper torso) between the pusher bar and the assembly platform. The employee suffered broken ribs.

Employees were chipping concrete/brick to separate a building for demolition when the wall collapsed and debris fell onto the employees, resulting in hospitalization of two employees. One employee sustained a fractured left femur and a head injury, and the other sustained a severe head injury.

An employee was adjusting a paint roller when his left ring finger was caught in a chain and sprocket. The fingertip was amputated.

An employee fell while walking down the stairs. They were hospitalized with a fractured left ankle.

An employee was helping a coworker transport a tall palm tree with a mini skid steer. The employee was severely shocked by a high-voltage electrical wire above the ground.

An employee was retrieving a Christmas tree from a shelf using a ladder. He missed a step and fell to the concrete floor. He sustained injury to his head and wrist.

An employee was inspecting a generator whose radiator was leaking. He slipped, and a fan blade in the generator amputated his thumb and index finger.

An employee was operating an agricultural tractor during sugarcane harvesting. The employee sustained a lumbar sprain due to vibration or motion from the tractor.

An employee was moving a 3-ton condensing unit, strapped down on a dolly, out of a garage. The strap broke, causing the employee to fall backward onto the brick pavered driveway. The employee suffered injury to a spinal ligament in the neck.