105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Donaldson Company, Inc.

Caught in running equipment or machinery during regular operation · Cuts, lacerations

Federal OSHA recorded a severe workplace injury at Donaldson Company, Inc., 246 ENTERPRISE DR., AUBURN, ALABAMA 36830 on — Cuts, lacerations, affecting the arm(s), unspecified.

An employee operating a radial arm saw was drawn into the saw and sustained a severe laceration to the arm.

Hospitalized Arm(s), unspecified Arm saws, radial arm saws

Donaldson Company Inc.

On March 12, 2018, an employee was stuffing metal liners into media packs and placing them on a conveyor line when the employee attempted to adjust an element that was on the conveyor. The employee's left middle fingertip was then pinched between the end of the element and a step crossing over the conveyor, amputating the fingertip.

Donaldson Company, Inc.

An employee was brushing metal shavings out of a seamer when a metal sliver punctured his right hand. He later experienced hot/cold flashes, nausea, swelling in his right palm, and numbness in his right arm due to blood poisoning, requiring hospitalization.

Donaldson Company, Inc.

An employee was walking at floor level next to a machine. The employee tripped over a 3-inch piece of round stock sticking out of the machine and fell to the floor. She fell on her right arm and broke several bones.

Donaldson Company Inc.

An employee was operating the can draw press when he noticed that the transfer had malfunctioned. While he was adjusting the trigger eye, his hand was on the equipment. The machine cycled after he made the adjustment, pinching his hand between the machine and the moving press transfer. His right middle fingertip was amputated.

View Donaldson Company, Inc.'s full OSHA safety record →

Pall Corporation

An employee was operating a machine when a wire pulled his right glove resulting in amputation of the index and middle fingertips.

Koch Foods of Cincinnati

An employee was grinding chicken when their right index fingertip was caught in the grinder and amputated.

Stella-Jones Corporation

An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.

Mack Manufacturing, Inc.

An employee was passing through a large metal door when the door closed on the employee, resulting in a cracked rib.

Nutmeg Container Corporation

An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.

Seoyon E-HWA Manufacturing Auburn, Inc.

An employee was making repairs to a milling machine located in the mold shop. While using a screwdriver to make adjustments, the machine energized and struck the employee. The employee's right arm was fractured.

TAIHO CORPORATION OF AMERICA, INC.

An employee was breaking down dunnage to prepare totes and trays to go through a tote washer. A tow motor driver asked the employee to move a cart that was in the way so the tow motor could remove a gaylord. The employee moved the cart and then stepped away from the tow motor. As the employee moved to an area between carts, his right foot got caught by a cart, causing him to twist and fall on top of a cart, landing on the left flank of his torso. The employee suffered a hemorrhage on his left flank.

Champion Laboratories, Inc

An employee tripped over a computer cord and fell fracturing their femur.

Walor North America Inc.

Three employees were installing a transfer rail in a press. There were two employees holding the rail and the injured employee was at the end of the rail guiding the rail into the bracket. The task was done manually with no mechanical equipment. The employee had their finger at the end of the rail and went to make sure the rail was lined up while the other two employees pushed it into the bracket, causing their finger to become pinched between the rail and bracket. The employee's middle fingertip was amputated. Protective gloves were worn at the time of the incident.

SMP Automotive Systems Alabama Inc.

An employee was walking across the dock, interacting with forklift drivers on what was being loaded. A forklift drove forward with a tall load on the forks. The employee was struck by the load (running board/rocker panel rack) on the forklift. The employee sustained several contusions and an injury to their right Achilles tendon that required surgery.

Sysco Gulf Coast, LLC

An employee was traveling down the maintenance aisle of a warehouse on a single-pallet front rider jack. The jack malfunctioned, causing the brakes to apply; the employee fell forward onto the concrete warehouse floor. The employee suffered an injury to the left leg and was hospitalized, requiring surgery.

Norflex, Inc.

An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.

Ampler Pizza II LLC

An employee was shot in the leg with a pistol during an altercation with two people who had entered the store without permission.

Birdsong Corporation

An employee was directing a truck driver to a dump site when the truck's peanut trailer slipped off the kingpin. As the trailer fell, a ladder attached to it lacerated the employee's ear. The employee was hospitalized.

Pilgrims

An employee was unloading a forklift from a trailer to the ground. The employee was climbing down the ladder of the trailer when their foot slipped through one of the rungs, causing them to fall backward onto the forklift forks. The employee was hospitalized for fractured ribs.