Caught in running equipment or machinery during regular operation · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Owens-Brockway Glass Container Inc., 901 N Shabbona, STREATOR, ILLINOIS 61364
on — Amputations, affecting the finger(s), fingernail(s), unspecified.
Final narrative
An employee was using a pedestal grinder to grind a piece of square metal stock that was 1/4 inch in diameter by 13 inches in length. The employee placed the piece against the grinding wheel when the piece and his gloved hand were pulled into the opening between the work rest and the grinding wheel, resulting in a partial amputation of the employee's left thumb.
An employee was cleaning glass from under a conveyor belt using a broom. Her left arm was caught and pulled into the conveyor roller, where it was trapped. The arm was broken, as was a finger on her left hand.
An employee was troubleshooting the cause of a glass jam in a forming machine. As the employee was removing a knuckle pin from a glass forming machine so it could be replaced, the adjacent section's hanger opened. The employee's left thumb was pinched between the two sections, causing a partial amputation of the thumb tip.
An employee was operating a glass forming machine when the funnel closed on his left arm. The molten glass burned his left hand and forearm, and the machine caused contusions to his forearm and hand.
On 3/22/2018, an employee was clearing bottles from a conveyor when her finger was caught in the sprocket and pulley mechanism at the junction between the conveyor and the machine, resulting in a finger amputation.
An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.
An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 327213)
An employee was stepping down from stairs to a concrete floor and her left ankle buckled, resulting in a fracture that required surgery. The employee was hospitalized.
An employee was working on a conveyor system when a pallet became stuck. The employee was adjusting the sensor when the pallet came free and crushed their left middle finger, resulting in a fingertip amputation.
An employee was cutting a weld to free part of a lehr tunnel for removal. One of the zones of the tunnel shifted and struck the employee's head, causing a contusion and a forehead laceration.
Three employees were cleaning out a dust collector that had jammed. They removed they auger to facilitate cleaning. The injured employee's right hand became entangled in a rotary airlock valve, resulting in an amputation of the first digit of their right index finger that required hospitalization and surgery.
An employee was changing a die in a press when the die slipped and crushed the employee's left index finger. The employee sustained an open facture of the tuft of the left distal phalanx and a partial amputation.
An employee was driving a boom lift (in the lowered position) in an exterior dock area. The lift s left wheels rolled onto base plates that covered a 3-foot-deep sump pit. The base plates failed, and one side of the lift dropped. The employee's left leg was caught under the lift basket, and he suffered a fracture to the lower leg including the ankle.