Struck by rolling object or equipment being pushed by another person · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Atlantic Plant Maintenance, Inc., 555 Point Ferry Road, NEWARK, ARKANSAS 72562
on — Amputations, affecting the fingertip(s).
Final narrative
On October 4, 2021, at 8:20 a.m., two employees were using a hand pallet jack to move a trash dumpster to a crane bay. At the base of the trash hopper, there are two slots and a skid that allow a forklift to move the dumpster. Between the slots is a small metal pedal that allows the dumpster to slide forward. The employees attempted to insert the pallet jack under the skid, but the metal pedal was obstructing the forks of the pallet jack. Employee 1 reached down to lift and hold the pedal into position as Employee 2 inserted the forks. The forks pinched Employee 1's left middle finger, resulting in a fingertip amputation.
Employees were removing hydrogen seal casing using a c-beam to rig it out of its position. The work group had the seal free and floating while attempting to prevent it from being damaged. The c-beam made contact with the end shield without the employees realizing it. They verbally gave a crane operator the signal to cable down, and when he did, the seal came toward the group with more force than expected. The seal casing hit one employee's right hand on his little finger, resulting in a fingertip amputation.
An employee was moving a cart with a grey board on it. Due to shifting of the cart or a wheel catching on an obstruction, the cart tipped over and struck two employees. One employee sustained a laceration on his arm requiring hospitalization.
While cutting wood on a table saw, an employee sustained a laceration from the left index fingertip down to the palm of the hand, requiring hospitalization.
On November 28, 2023, at approximately 6:50 AM, an employee was struck by a cart containing a stack of plastic trays. The employee was hospitalized for three rib fractures.
An employee was using an electric cart pusher to move carts inside of the cart vestibule. The employee's left foot was caught between the carts and the cart door, resulting in two broken bones.
On September 21, 2023, an employee and a co-worker were moving a boat mold with a dolly. The injured employee pulled on the mold while the co-worker pushed from the front. The injured employee became pinned against another mold that was behind them, resulting in an abdominal pain and bruising to the lower back that required hospitalization.
An employee was struck by a loaded cart of dairy products that was being pushed from the warhouse to the cooler area, resulting in a right hip fracture.
The injured employee ducked under flooring materials that were on a cart being moved by another employee. The materials struck the injured employee resulting in a laceration under their eye.
More severe injuries in this industry (NAICS 238290)
An employee was operating a gas tugger to lift metal sheeting. His left hand was pulled into the pulley, which crushed his left thumb, resulting in avulsions and other tissue damage. He was hospitalized and required surgery.
An employee was assisting with cutting a vertical steel pile. A 16-foot by 9-inch section of pile dropped to the side and bounced off a previously cut pile and toward the employee. The employee was struck in the torso and leg, causing his knee to dislocate from his femur. The employee was hospitalized.
On July 30, 2025, an employee was utilizing a circular saw to cut plastic into strips that would be used as shims. The blade of the saw amputated his left little finger to the second knuckle.
An employee was working on the ingot loader of a aluminum processing machine and noticed a pin was not installed. The employee reached to retrieve the pin and the machine activated for a functions test. The machine closed on the employee's hand, resulting in a hand injury requiring hospitalization.
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.
On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.