Ignition of vapors, gases, or liquids · Second degree heat (thermal) burns
At a glance
Federal OSHA recorded a severe workplace injury
at US Forest Service Pikes Peak, 601 S. Weber Street, COLORADO SPRINGS, COLORADO 80903
on — Second degree heat (thermal) burns, affecting the leg(s), unspecified.
Final narrative
A flammable mix spilled on an employee's leg during forest firing operations. Afterward, air entered the employee's trouser leg at the cuff and, with an ignition source present, the vapors within the trouser leg ignited. The employee suffered second-degree burns to the right leg.
HospitalizedLeg(s), unspecifiedChemicals and chemical products, unspecified
An employee was cleaning a cordless drill. As they applied brake fluid to the drill and pulled the trigger, the fluid ignited. The employee suffered burns to the face, hands, and arms.
An employee was spraying glue to the floor of an enclosed cargo trailer. The fumes made contact with the heater causing a flash fire. The employee suffered burns to their face and right hand.
An employee was replacing a valve in the gas line to the fryer. The shutoff valve malfunctioned resulting in a gas leak that then ignited. The employee sustained burns requiring hospitalization.
A smoke jumper parachuted out of a helicopter during a forest fire response, landed on steep rugged terrain, and suffered femur and rib fractures and a liver laceration. The employee was hospitalized.
Employees were troubleshooting dual duct detectors in a room. The injured employee was on the second rung from the top of a forward-facing 12-foot A-frame ladder. He was reinstalling the duct detector in the furthest duct from him (18 inches). When he pushed the duct detector into the existing holes, the duct broke free and fell, striking his back and shoulders. He was knocked forward over the ladder and fell to the floor. The employee sustained a head injury.
An employee was descending an 8-foot A-frame ladder when he tripped over the fourth step/rung and fell, contacting the floor and a sprinkler pipe that was set on the ground. The employee sustained fractures to his left arm.
An employee working as a contracted firefighter was using a bulldozer to push back an active fire line when they became entrapped in flames, resulting in first- and second-degree burns.
An employee was engaging in daily physical training in preparation for fire season as a smokejumper. The employee sustained swelling and stiffness in their arms and was hospitalized with rhabdomyolysis.
An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.
An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.
A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.
An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.