WAUPACA, WISCONSIN—
Waupaca Foundry Inc. (Plant 1)
Compressed or pinched by shifting objects or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury at Waupaca Foundry Inc. (Plant 1), 406 N. Division St., WAUPACA, WISCONSIN 54981 on — Amputations, affecting the finger(s), fingernail(s), unspecified.
Final narrative
An employee was offloading casted parts from a grinding line. The employee went to flip one part over when the next part made contact with his right ring finger, resulting in an amputation of the distal end of the finger.
More severe injuries at Waupaca Foundry Inc. (Plant 1)
WAUPACA, WISCONSIN—
Waupaca Foundry Inc. (Plant 1)
An employee was using a stand grinder to grind a riser and contacts off a casting. His left little finger made contact between the casting and the grinding stone, and the grinding stone caused a partial amputation to the finger.
WAUPACA, WISCONSIN—
Waupaca Foundry Inc. (Plant 1)
On February 25, 2019, at approximately 11:00 a.m., an employee lacerated their left forearm on a grinding wheel. The employee was cutting a 2" pipe for replacement.
WAUPACA, WISCONSIN—
Waupaca Foundry Inc. (Plant 1)
An employee was grinding a part when their glove got caught on a flange and their hand contacted the grinding stone. This resulted in the partial amputation of the left middle finger.
WAUPACA, WISCONSIN—
Waupaca Foundry Inc. (Plant 1)
On or about January 15, 2016, an employee was inspecting castings on the quality belt. While attempting to pull a basket of castings back onto the quality belt, the employee tripped over an electronic eye and fell backwards over the mid-rail and onto the ground, suffering a concussion. The top section of the guardrail was removed at the time of the incident.
View Waupaca Foundry Inc. (Plant 1)'s full OSHA safety record →
Similar incidents · Same event type
MECHANICSBURG, PENNSYLVANIA—
TForce Freight
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
DELAWARE CITY, DELAWARE—
Liveo Research, Inc.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
FORT WORTH, TEXAS—
Best Pump and Flow
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
BUFFALO, NEW YORK—
FORD MOTOR COMPANY
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
UNADILLA, GEORGIA—
Lasseter Tractor Company. Inc.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 331511)
BENTON, PENNSYLVANIA—
Benton Foundry, Inc.
An employee was realigning two halves of a core box on a core-making machine. Pneumatic pressure released, causing the core box to close on the employee's right thumb. The thumb tip was amputated between the nail and the knuckle.
BIRMINGHAM, ALABAMA—
American Cast Iron Pipe Company
An employee was performing maintenance/electrical work inside a substation, and used a ladder to access the top of a panel box. The employee fell 8-9 feet from the top of the panel box to the ground. The employee was hospitalized with fractures to their ribs and a shoulder injury.
BLYTHEVILLE, ARKANSAS—
NIBCO INC.
An employee's hand was caught in a pinch point in the area of a conveyor for a flask running out of a foundry molding machine. The employee's ring finger was crushed and partially amputated at the base.
PRYOR, OKLAHOMA—
American Castings, LLC
An employee noticed a block was out of place under the weighted mold frame. The employee used another block to push the block out and replace it. When the block came out, the frame came down on his right ring and little fingers. The employee sustained a fracture and partial amputation to the ring fingertip.
JACKSON, OHIO—
OSCO Industries Inc.
An employee was using a fork truck to move a tub containing molten iron that had been drained from the cupula. The tub tipped over and the molten metal came in contact with water. This caused the molten iron to splash back and burn the employee's upper torso.
More severe injuries in WISCONSIN
MADISON, WISCONSIN—
RG Professional Carpenter, Inc.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
FRANKLIN, WISCONSIN—
General Thermodynamics, Inc.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
SAINT CLOUD, WISCONSIN—
Sargento Foods Inc
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
HIXTON, WISCONSIN—
Asher Enterprises, Inc.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
VERONA, WISCONSIN—
Consolidated Electrical Distributors Inc.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.