Injured by slipping or swinging object held by other person · Cuts, lacerations
At a glance
Federal OSHA recorded a severe workplace injury
at Advanced Drainage Systems, Inc., 115 West Crown Point Road, WINTER GARDEN, FLORIDA 34787
on — Cuts, lacerations, affecting the arm(s), unspecified.
Final narrative
On December 17, 2021, two employees were working together to cut a pipe. Employee 1 was operating the saw and employee 2 was standing behind the cutting operation to assist. Employee 1 moved the saw to the side and the blade contacted employee 2's arm. Employee 2 was hospitalized with a laceration, and surgery was needed to remove plastic embedded in their arm.
On 8/22/2025, an employee was working to clear a grinder jam. The employee was using a "no-touch tool" to rotate the drum of the grinder. He slipped forward and his right hand contacted a pinch point between the backside of the blade and the grinder housing. The employee's right middle fingertip was partially amputated with bone loss.
On May 2, 2025, at approximately 11:30 AM, an employee was using a hawkbill knife to cut plastic material off a die head when the knife slipped and lacerated their right knee. The employee was hospitalized and required surgery.
An employee was clearing a jam in a machine when their left little fingertip contacted the metal blade, resulting in the amputation of the first digit.
At 10:00 a.m. on January 9, 2025, an employee slipped on ice while walking through the yard to their truck. The employee fell to the ground and suffered a broken right femur. The employee was hospitalized.
An employee was using a lathe to sand down a shaft. Their glove got caught on the spindle and their hand and arm were pulled into the machine. The employee sustained a dislocated wrist, a dislocated little finger, and a fractured arm. The employee was hospitalized.
The injured employee was holding a board that was being cut by another employee. The board kicked back, causing the saw to amputate the employee's left little finger and lacerate their left hand, resulting in nerve damage.
On September 26, 2023, an employee was working in a trench box while a co-worker was lowering a piece of plastic pipe by hand using a rope. The pipe swung and struck the employee's hand, fracturing their right thumb and middle and ring fingers. The employee was hospitalized.
An employee went over to a co-worker's station while the co-worker was using a powered meat knife. As the injured employee was pointing, his right index fingertip was amputated.
Two employees were using a handheld banding tool to make banding tape for tent set-ups. One employee was holding the banding tool and the injured employee was looping a metal clip around the tape. The tool closed while the injured employee's hand was near the banding mechanism. The banding tape caught the employee's right ring finger as it tightened, resulting in a partial amputation.
An employee was holding a branch against a log on the ground to make a wedge while another employee was using a chainsaw to cut the wedge. The saw slipped and struck the employee holding the branch, resulting in a laceration to the right wrist.
More severe injuries in this industry (NAICS 326122)
Employees were hooking up a new reel of pipe to be processed into shorter lengths. This process involved routing a winch cable through a haul-off and attaching it to the pipe using a clamp. One employee held the winch cable while another pressed the feed-out button to loosen the cable. The cable tightened and pulled the hand of the employee holding it into a pulley. The employee's right index and middle fingertips were amputated at the first knuckle.
On 8/22/2025, an employee was working to clear a grinder jam. The employee was using a "no-touch tool" to rotate the drum of the grinder. He slipped forward and his right hand contacted a pinch point between the backside of the blade and the grinder housing. The employee's right middle fingertip was partially amputated with bone loss.
At about 1:25 a.m. on August 14, 2025, an employee was operating a 10-inch band saw at a molding machine. The employee was working to cut the sprue off a PVC fitting. The blade snagged on the sprue and pulled his left index finger into the blade, which cut it. The finger was partially medically amputated.
An employee was helping a coworker transport a tall palm tree with a mini skid steer. The employee was severely shocked by a high-voltage electrical wire above the ground.
An employee was retrieving a Christmas tree from a shelf using a ladder. He missed a step and fell to the concrete floor. He sustained injury to his head and wrist.
An employee was operating an agricultural tractor during sugarcane harvesting. The employee sustained a lumbar sprain due to vibration or motion from the tractor.
An employee was moving a 3-ton condensing unit, strapped down on a dolly, out of a garage. The strap broke, causing the employee to fall backward onto the brick pavered driveway. The employee suffered injury to a spinal ligament in the neck.