Caught in running equipment or machinery during regular operation · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Creed-Monarch, Inc., One Pucci Park, NEW BRITAIN, CONNECTICUT 06050
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
An employee was feeding a part into the die of a partial-revolution mechanical power press. The press cycled and amputated the employee's left index finger.
An employee had been disposing of scrap bar and fell into the well of a receiving dock. The employee sustained fractured ribs, a fractured clavicle, and a punctured lung.
An employee was moving a water tank. Their finger was in a hole in the handle when the water tank struck the barrier protecting the electrical panels and removed the fingertip.
An employee was feeding material into a machine when the employee's left pinky finger was pinched between the material and the machine, resulting in a partial left pinky finger amputation.
An employee was removing a part from a spark changer tool when her hand was caught in the tool's rotating platform, breaking three fingers and tearing skin off the back of her right hand. She was hospitalized.
An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.
An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 332721)
An employee was raising a lift to fix a server box when the lift caught the edge of the box and it fell. The employee's finger was pinched by the box, resulting in a fingertip amputation.
An employee was working to remove an extra slug from a press. The employee pushed the eject button, then tried to catch the slug. When the release came out, it pinched the employee's right index finger against the slug, resulting in an amputation to the finger.
On September 5, 2025, at approximately 7:35 AM, a temporary employee was at the engine block rollover machine. Their left index fingertip was caught and amputated between a pneumatic part and a guard.
An employee was cleaning coolant tank magnets used to separate metal grinding mud from the coolant tanks. As the employee went to separate two magnets they snapped back together and crushed his right thumb, resulting in amputation of the top of the thumb.
A maintenance technician was measuring the width on a metal compressor's stroke length when their finger was pinched in the machine. The employee was hospitalized with lacerations to their finger.
An employee was checking on a machine outside of the building and removed a cover to clean out a blocked area. His hand was caught by a rotary valve in a dust collection machine. The employee's fingertip was amputated.
An employee was working to clean a glue roller with a scraper tool. The tool and the employee's left thumb were pinched between two rollers, resulting in a partial amputation.
An employee was re-arranging boxes of pipe insulation on a pallet. One of the boxes fell from the pallet and knocked over an upright empty cylinder. The cylinder fell and crushed the tip of the employee's right toe. The employee's toe required surgical amputation.
An employee was securing the claw of a grapple truck to the truck bed. His left little finger was caught between the tie down strap and the rub rail of the truck, resulting in partial amputation of the finger.
An employee was cutting extruded aluminum framing material using a horizontal band saw. She went to grab a rag in the machine when the rag contacted the blade and pulled her hand in toward the blade, resulting in a partial amputation of the right index finger.