Struck by dislodged flying object, particle · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at ACME Brick Company, 3024 Acme Brick Plaza, FORT WORTH, TEXAS 76109
on — Amputations, affecting the fingertip(s).
Final narrative
A kiln car, carrying bricks, was being moved out of a dryer. It started to roll back. An employee jammed a piece of square tubing between cars to stop the car's motion; the tubing kicked back and crushed the tip of his left index finger against a control panel. The employee suffered a partial amputation to the fingertip.
An employee was operating a transfer car when it stopped moving. He noticed that a brick had fallen and jammed. When he went to remove the brick with a shovel, the car started moving and caught his left foot against the pit's concrete wall. He suffered a fracture and lacerations to the lower left leg.
On July 2, 2025, an employee was walking to a building through a shed used to store dirt and went to climb a 45-inch pile of loose clay material when they tripped and fell forward. The employee sustained a dislocated right ankle, torn ligaments, a fractured tibia, and sprains to the right ankle and leg. The employee was hospitalized.
An employee was packaging brick. A brick broke from the bundle and became lodged between the conveyor rollers. The employee was removing the brick when the bundle of brick shifted forward, catching his left index finger between the bundle and the conveyor roller and resulting in a partial amputation to the fingertip.
An employee was emptying a small hopper into a larger hopper. When they pulled the return latch to return the small hopper to its original position, the employee's finger was caught between the hopper and the latch, resulting in an amputation to the distal phalanx.
An employee was picking up broken bricks from the floor to throw into a hopper. A forklift reversed, and its counterweight struck the employee. The employee suffered a broken left foot, as well as injuries to the leg and ankle, and was hospitalized.
An employee was tossing a damaged toilet into a compactor. The toilet bounced off the compactor and lacerated the employee's right wrist, cutting an artery and tendon.
An employee was operating a hydraulic jack to bend a frame when the jack came loose and struck the employee. They were hospitalized for a spleen injury.
A truck had been towed into the shop with a flat tire and a blown airbag. An employee checked the tire for damage and was airing the tire. The employee was installing the valve core when the bead slipped off the rim. Air escaped, and the aluminum wheel struck the employee's head and face. The employee became unresponsive and was bleeding.
On December 14, 2023, at 8:40 p.m., three employees were inspecting milling machines for startup. A few of the sleeves on the mill drum needed to be changed out. The injured employee was trying to input a sleeve on the mill drum using a hammer. The hammer hit the edge of the drum, which caused a metal piece to splinter off and strike the employee's cheek just below the left eye. The metal splinter embedded in the back of their eye socket, resulting in pain, swelling, and bleeding that required hospitalization.
An employee was pushing a line of carts into a vestibule when the door cable snapped and struck his right ankle. The employee suffered a fracture that required surgery and hospitalization.
More severe injuries in this industry (NAICS 493110)
On October 30, 2025, an employee was working to adjust a stackable metal shipping container. As the container dropped into place, it caught the employee's hands in an area between the upper and lower cross-members. The employee suffered a laceration to the left ring finger that required stitches, bruising to the right ring finger, and fractures to the right middle finger that necessitated medical amputation of the fingertip.
An employee was operating an extruder and performing a spool swap over from the right spindle to the left spindle. After rewiring the new spool, the employee's clothing got caught in the turning shaft when the left spindle started back up. The employee's left arm was pulled into the machine, resulting in a fractured humerus and lacerations to her triceps. She was hospitalized and required surgery.
An employee was resetting a warehouse racking system utilizing an order picker. They fell approximately 5 feet from the order picker to the concrete floor and sustained fractured ribs.
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.