Fall or jump from water vehicle · Bruises, contusions
At a glance
Federal OSHA recorded a severe workplace injury
at Marine Contracting Corporation, 1201 Terminal Ave., NEWPORT NEWS, VIRGINIA 23607
on — Bruises, contusions, affecting the lumbar region.
Final narrative
An employee had just climbed down from a 6-foot A-frame ladder and was trying to fold it. With both feet firmly on the deck of the barge, the employee took a step back and caught his foot on the lowest rung of the ladder. The employee fell backward and landed on a steel mooring cleat mounted to the outside edge of the barge. The employee then rolled off the barge and into the water 3 feet below. The employee sustained a lower back contusion.
An employee was preparing pilings on a tied-off barge when they tripped and fell three feet from the barge to the ground. The employee sustained a lower right leg and ankle displacement.
An employee was taking a discharge hose off a barge. When he went to throw the hose onto the dock, it caught his glove and pulled him with it. He fell about 5 feet off the barge, suffering a broken collarbone and rib.
An employee was rigging and guiding loads during crane operations. The crane lifted a 212-pound generator and tipped over with the boom crushing a nearby structure. Two employees on top of the structure jumped clear of the falling crane boom. A stanchion pole impaled the injured employee's upper thigh and they sustained lacerations to the thigh and buttocks. The second employee did not require medical treatment.
An employee was stepping off a gangway and tripped on a piece of rope that is attached to the safety net. This caused him to fall to the dock and then he rolled underneath the passenger side of a pickup truck that was parked about 3 to 4 feet from the gangway. When the pickup truck pulled away, it ran over the employee's left leg and fractured it.
More severe injuries in this industry (NAICS 811310)
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
An employee was climbing a ladder to inspect a vent in a restaurant dining area. The ladder slid out on the floor and the employee fell approximately 12 feet onto the ladder and the floor. He was hospitalized with a dislocated shoulder and a back injury.
An employee was operating a lift truck when it struck a stationary lift truck. His left thumb was pinched between the two lift trucks, resulting in a partial amputation.
An employee was disassembling a pressurized unit using a driver drill. When the unit was disassembled, it caused a kickback from the tube head, causing the drill to strike the employee's left forearm. They sustained a diaphyseal fracture to their left radius and ulna, which required surgery.
After repairing a piece of industrial equipment, an employee had brake-cleaning liquid on his gloves. A lighter ignited the liquid, and the employee's hands were severely burned.
A building engineer was inspecting a generator. As he closed the generator enclosure door, his right ring finger was caught between the door and the door frame. The fingertip was amputated.
An employee was walking back to a carrier case with mail in her hand when she tripped over a tub. Her back overarched as she fell, resulting in a fractured back that required hospitalization.
An employee was driving a utility tractor rig when it struck the rear trailer of another utility tractor rig, which was traveling in the opposite direction. The glancing impact caused damage to the cab, and he sustained a laceration on right side of his face, a cervical fracture, two fractured left ribs, and a pelvic fracture. The employee was hospitalized.
An employee was washing an aircraft from a scissor lift when they fell to the floor. The employee sustained a back injury and lacerations to their head and neck.