Calumet River Fleeting, Inc.

An employee fell about 12-15 feet from a drydock barge and suffered two fractured ankles and was hospitalized.

An employee was stepping off a boat onto a rocky river bank. He tripped due to the uneven walking surface and fell, suffering a broken right tibia.

An employee was preparing pilings on a tied-off barge when they tripped and fell three feet from the barge to the ground. The employee sustained a lower right leg and ankle displacement.

An employee was rigging and guiding loads during crane operations. The crane lifted a 212-pound generator and tipped over with the boom crushing a nearby structure. Two employees on top of the structure jumped clear of the falling crane boom. A stanchion pole impaled the injured employee's upper thigh and they sustained lacerations to the thigh and buttocks. The second employee did not require medical treatment.

An employee had just climbed down from a 6-foot A-frame ladder and was trying to fold it. With both feet firmly on the deck of the barge, the employee took a step back and caught his foot on the lowest rung of the ladder. The employee fell backward and landed on a steel mooring cleat mounted to the outside edge of the barge. The employee then rolled off the barge and into the water 3 feet below. The employee sustained a lower back contusion.

An employee was stepping off a gangway and tripped on a piece of rope that is attached to the safety net. This caused him to fall to the dock and then he rolled underneath the passenger side of a pickup truck that was parked about 3 to 4 feet from the gangway. When the pickup truck pulled away, it ran over the employee's left leg and fractured it.

An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.

An employee was struck by a plasma cutter and suffered a broken left tibia and fibula. The employee was hospitalized.

An employee was preparing to bend a flat bar in a brake press. When the machine was jogged, the stock rotated up and crushed his left middle fingertip against the outer frame of the die. The fingertip was amputated.

An employee was cutting metal with a torch. A piece of metal struck the employee's left foot, causing multiple fractures to metatarsal(s). The employee was hospitalized.

An employee was descending a ladder carrying a bag of trash. He fell, landed on the ground about 10 feet below, and suffered fractures to his right hip and pelvis.

An employee fell while moving a water canister, resulting in fractures to four fingers on her right hand.

An employee was changing a die in a press when the die slipped and crushed the employee's left index finger. The employee sustained an open facture of the tuft of the left distal phalanx and a partial amputation.

An employee was mixing sauce using a sauce barrel mixer when his left little finger was amputated.

An employee was driving a boom lift (in the lowered position) in an exterior dock area. The lift s left wheels rolled onto base plates that covered a 3-foot-deep sump pit. The base plates failed, and one side of the lift dropped. The employee's left leg was caught under the lift basket, and he suffered a fracture to the lower leg including the ankle.

A temporary employee was carrying a nail gun through the warehouse when it hit his leg, activated, and fired a nail into the leg.