General Dynamics Ordnance and Tactical Systems, Inc.

At about 2:15 p.m. on February 10, 2025, employees were unloading pallets of propellant into a storage warehouse. The pallets were double stacked, and a top-loaded pallet had shifted in transit. Two employees were manually moving the pallet when the fiber packs shifted, causing one employee's left index finger to be pinched between the fiber pack and the pallet. The employee suffered a partial amputation to the fingertip.

On July 10, 2024, an employee developed a heat-related illness and was hospitalized with dehydration.

A CNC operator was trying to replace a bearing in the hydraulically operated steadying fixture in a CNC machine. The fixture retracted, amputating the end of his right thumb.

An employee was changing an insert in the tool head of a CNC machine. The employee had stepped up approximately 28 inches onto the door track of the machine. When the employee went to step back down to the floor, they lost balance and fell backward onto a rack of metal parts. The employee sustained a compression fracture to the spine.

An employee was adjusting a switch on the loading cradle for a metal tracer lathe. The machine cycled, resulting in an amputation to the left index fingertip.

An employee connected a steam line to a hose to clean equipment when the fitting broke loose. They were struck by steam in the left inner thigh, resulting in burns that required hospitalization.

An employee was straining hot water from a pot of rice when the water splashed onto them, resulting in burns to their chest, arms, shoulder, and back.

An employee was making tea when she noticed tea grinds were collecting on the side and water was no longer dripping through the funnel. The employee was checking the funnel when boiling water and tea grinds spilled onto the left side of her body. The employee sustained burns to her neck, back, and arm.

An employee had turned off the ball valve on a waterpipe system and was removing the plug when the coupling system attached to the strainer came apart. Hot water sprayed on his arm and back, resulting in first- and second-degree burns that required surgery.

An employee was using a shovel to remove waste vermiculite from molten zinc. The metal had been placed in a bin and partially hardened. The employee broke through the partially hardened metal; still-molten metal flowed to the employee's steel-toed right boot and entered through the cloth boot tongue. The employee suffered a third-degree burn to the right foot and was hospitalized.

An employee was working on a production line. The employee went to retrieve parts that came out of the parts holder, and their left hand became caught between a chain and a sprocket. Three fingers on the hand were amputated.

At about 2:15 p.m. on February 10, 2025, employees were unloading pallets of propellant into a storage warehouse. The pallets were double stacked, and a top-loaded pallet had shifted in transit. Two employees were manually moving the pallet when the fiber packs shifted, causing one employee's left index finger to be pinched between the fiber pack and the pallet. The employee suffered a partial amputation to the fingertip.

An employee was walking on the sidewalk near the administrative building when he slipped on ice and fell to the concrete ground. The employee suffered a left hip fracture and was hospitalized.

A CNC operator was trying to replace a bearing in the hydraulically operated steadying fixture in a CNC machine. The fixture retracted, amputating the end of his right thumb.

An employee was changing an insert in the tool head of a CNC machine. The employee had stepped up approximately 28 inches onto the door track of the machine. When the employee went to step back down to the floor, they lost balance and fell backward onto a rack of metal parts. The employee sustained a compression fracture to the spine.

An employee fell while moving a water canister, resulting in fractures to four fingers on her right hand.

An employee was changing a die in a press when the die slipped and crushed the employee's left index finger. The employee sustained an open facture of the tuft of the left distal phalanx and a partial amputation.

An employee was mixing sauce using a sauce barrel mixer when his left little finger was amputated.

An employee was driving a boom lift (in the lowered position) in an exterior dock area. The lift s left wheels rolled onto base plates that covered a 3-foot-deep sump pit. The base plates failed, and one side of the lift dropped. The employee's left leg was caught under the lift basket, and he suffered a fracture to the lower leg including the ankle.

A temporary employee was carrying a nail gun through the warehouse when it hit his leg, activated, and fired a nail into the leg.