Caught in running equipment or machinery, unspecified · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Proximity Malt, LLC, 1001 North County Road 3 East, MONTE VISTA, COLORADO 81135
on — Amputations, affecting the finger(s), fingernail(s), unspecified.
Final narrative
An employee was swapping barrels under a dust cyclone. The employee turned around and ran into an adjacent barrel and lost balance. His right hand went up the sock that surrounded the bottom of the dust collector and the rotating airlock blade partially amputated his index and middle fingers. The machine was not guarded at the time.
AmputationFinger(s), fingernail(s), unspecifiedWashers, dryers, and cleaning machinery and appliances, n.e.c.
During a dust baghouse inspection, a discharge chute plugged up with grain debris. An employee went to remove the debris and his finger got caught in the rotary airlock. The employee sustained a laceration to their right middle finger that resulted in a partial amputation.
On December 19, 2023, an employee was setting up a copper wire drawing machine when his left ring finger was pinched between a copper wire and a machine part. The employee's finger was partially amputated.
An employee was checking the gusset seal on a machine. He moved to the next cross sealer and the machine activated, causing an amputation to a left-hand finger. The employee was hospitalized.
An employee was evaluating a coiling machine to verify that the blade was present inside it. The machine's weld function was activated, and the machine crushed the employee's fingers, resulting in the amputation of the left middle and ring fingers.
During a dust baghouse inspection, a discharge chute plugged up with grain debris. An employee went to remove the debris and his finger got caught in the rotary airlock. The employee sustained a laceration to their right middle finger that resulted in a partial amputation.
An employee was shutting down at the end of a shift when he noticed dust was jamming his machine. When the employee cleared the jam, his fingers made contact with the rotary airlock blade, resulting in the amputation of the middle finger right below the fingernail and the ring fingertip.
An employee was installing a new gear in a hand-operated flake mill and trying to line up the gear with a worm screw shaft approximately 18 inches long and weighing 30 pounds. The employee's left thumb was pinched between the shaft and the gear, resulting in a fingertip amputation.
An employee was entering an area through an opening in a plastic curtain barricade. The employee's foot got caught on the bottom of the curtain and she fell to the concrete floor, breaking both wrists.
An employee was walking behind a forklift when it ran over the employee's foot. The employee suffered four broken toes, a dislocated right ankle, and a laceration.
An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.
An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.
A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.
An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.