CHILTON, WISCONSIN—
Briess Industries Inc
Compressed or pinched by shifting objects or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury at Briess Industries Inc, 625 South Irish Road, CHILTON, WISCONSIN 53014 on — Amputations, affecting the fingertip(s).
Final narrative
An employee was installing a new gear in a hand-operated flake mill and trying to line up the gear with a worm screw shaft approximately 18 inches long and weighing 30 pounds. The employee's left thumb was pinched between the shaft and the gear, resulting in a fingertip amputation.
More severe injuries at Briess Industries Inc
WATERLOO, WISCONSIN—
Briess Industries, Inc.
An employee was shutting down at the end of a shift when he noticed dust was jamming his machine. When the employee cleared the jam, his fingers made contact with the rotary airlock blade, resulting in the amputation of the middle finger right below the fingernail and the ring fingertip.
CHILTON, WISCONSIN—
Briess Industries Inc
An employee contacted the moving auger while cleaning it. The employee sustained three fractured fingers and tendon and nerve damage. The auger was not locked out/tagged out at the time.
MANITOWOC, WISCONSIN—
Briess Industries, Inc.
An employee became ill while shoving grain inside a kiln, requiring hospitalization for dehydration.
CHILTON, WISCONSIN—
Briess Industries, Inc.
An employee was preparing a cleaning solution for a weekly scheduled cleaning when two incompatible solutions were mixed, exposing the employee to chemical vapors. The employee experienced difficulty breathing.
CHILTON, WISCONSIN—
Briess Industries, Inc.
An employee was repairing a leaking valve when another valve opened and hot water was pumped into the system. The hot water scalded the employee, who suffered second degree burns.
View Briess Industries Inc's full OSHA safety record →
Similar incidents · Same event type
MECHANICSBURG, PENNSYLVANIA—
TForce Freight
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
DELAWARE CITY, DELAWARE—
Liveo Research, Inc.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
FORT WORTH, TEXAS—
Best Pump and Flow
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
BUFFALO, NEW YORK—
FORD MOTOR COMPANY
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
UNADILLA, GEORGIA—
Lasseter Tractor Company. Inc.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 311213)
LAUREL, DELAWARE—
Proximity Malt, LLC
During a dust baghouse inspection, a discharge chute plugged up with grain debris. An employee went to remove the debris and his finger got caught in the rotary airlock. The employee sustained a laceration to their right middle finger that resulted in a partial amputation.
WATERLOO, WISCONSIN—
Briess Industries, Inc.
An employee was shutting down at the end of a shift when he noticed dust was jamming his machine. When the employee cleared the jam, his fingers made contact with the rotary airlock blade, resulting in the amputation of the middle finger right below the fingernail and the ring fingertip.
MONTE VISTA, COLORADO—
Proximity Malt, LLC
An employee was swapping barrels under a dust cyclone. The employee turned around and ran into an adjacent barrel and lost balance. His right hand went up the sock that surrounded the bottom of the dust collector and the rotating airlock blade partially amputated his index and middle fingers. The machine was not guarded at the time.
FRANKLIN, OHIO—
Ferco Tech
An employee was entering an area through an opening in a plastic curtain barricade. The employee's foot got caught on the bottom of the curtain and she fell to the concrete floor, breaking both wrists.
DAYTON, OHIO—
Malt Products Corporation
An employee was walking behind a forklift when it ran over the employee's foot. The employee suffered four broken toes, a dislocated right ankle, and a laceration.
More severe injuries in WISCONSIN
MADISON, WISCONSIN—
RG Professional Carpenter, Inc.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
FRANKLIN, WISCONSIN—
General Thermodynamics, Inc.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
SAINT CLOUD, WISCONSIN—
Sargento Foods Inc
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
HIXTON, WISCONSIN—
Asher Enterprises, Inc.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
VERONA, WISCONSIN—
Consolidated Electrical Distributors Inc.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.