Utility Line Services, Inc.

An employee fell backward into an excavation that was 6-7 feet deep. The employee's ribs struck a hydraulic shore jack.

An employee was using a chop saw to cut pipe when the saw kicked back and severely lacerated the employee's neck.

An employee was walking on a job site when they were struck from behind by a pickup truck. The employee sustained fractures to the arms, pelvis, and legs.

An employee was leaf blowing to help clean the road. An excavator began backing up and caught the employee's foot, causing her to fall to the ground. The employee sustained the loss of a tooth, abrasions to the face and hand, and a cut to the foot.

An employee was tying a hose. A truck backed up, pinching the employee's leg between the hose and hammer union, resulting in a right fibula fracture.

An employee was using a ladder to cover a load of wood chips. A truck was trying to get by, so the employee got off the ladder and moved it out of the way. As the truck passed by, it struck the employee causing fractures to his lower right leg.

A crew was setting up to clean out a squeegee machine. The controls of the machine were struck by a spray wand, shifting the machine from park to reverse. When the machine was started, it lunged backward and caught an employee s leg against a water truck. The employee's leg was fractured.

An employee was moving a tensile strength test device with a dolly. The device fell from the dolly onto the employee's right leg, causing a compound fracture.

An employee fell while stepping off the tailgate of a pickup truck. The employee landed on the ground and suffered a broken left fibula and tibia.

On October 7, 2025, employees were conducting trenching operations for the installation of a new sewer line system. The excavator's bucket was detached and put inside the trench as it was being exchanged for a different-sized bucket. An employee entered the trench with a shovel to move some dirt located at the front end of the pipe. The excavator bucket shifted and slid, striking the employee s right foot and trapping it against the ground. The employee sustained a fractured right tibia.

Employees were working to dislodge a large truck that was stuck in a rut using tow straps and a front-end loader with the bucket removed. An employee connected the straps to the loader and truck and another employee slowly engaged the loader to close the coupler. The injured employee's arm became caught in a pinch point. The employee was hospitalized with a fractured arm.

An employee was lifting a piece of 30-inch line stopping equipment using a jack screw. A lifting eye weld snapped and the load dropped. The end of the jack screw then landed on the employee's heel and crushed it. The employee was hospitalized.

An employee tripped over a stool and fell on the floor, resulting in a left displaced mid-cervical femoral neck fracture.

An employee was installing fence posts when they stepped into a recently dug hole that was not visible due to rainfall. The employee's leg was fractured.

An employee assisted in cleaning material from a conveyor pit. After the pit was cleaned, the employee proceeded to replace metal safety plates to ensure other employees did not fall into the pit. While replacing one of the last plates, the employee mis-stepped and fell approximately 5 feet into the pit. The employee was hospitalized with back/side bruising, elbow bruising, bone bruises, and/or fractured ribs.

An employee was inspecting a breaker box and turning on/off a circuit breaker when he was electrocuted.

An employee was walking on the sidewalk. When they stepped off the curb, they fell to the ground, resulting in fractures to their tibia, fibula, and a metatarsal.