Republic Wire, Inc.

On July 1, 2025, an employee was using a wire pointer to prepare the end of a copper wire that will be fed through a set of dies on a machine. His right index finger was caught between the incoming copper wire and the capstan that rotates and pulls the wire. The employee was hospitalized and required the medical amputation of his right index fingertip.

An employee was troubleshooting the lift table of the automated take-up mechanism on the jacket extrusion line. He was able to get the table to raise up, at which point it engaged and lowered. The employee's leg was pinned between the lift table and the concrete floor. His ankle was broken and he was hospitalized, requiring surgery.

An employee was adjusting wire on the spool of a winding machine. The employee used the pendant to reverse the spool and grabbed the wire. The forward button was hit causing the wire to tighten on the employee's left hand and resulting in a partial amputation to the left ring finger.

An employee was walking to an extrusion machine to clean minor water accumulation on the floor. The employee slipped on the water and fell, suffering a back injury.

On November 26, 2018, a maintenance employee was working on a packaging machine and amputated the right index fingertip.

Two employees were walking through the warehouse behind a forklift that was moving pallets of 30-foot metal bottom bars. When the forklift reversed, the top of the forklift struck a box of metal bottom bars on top of racking, causing the box to fall and strike the two employees. They were both taken to the hospital; one employee was treated and released without being admitted. The other employee was hospitalized with a fractured left orbital bone and an injured right knee.

The injured employee was spray painting lay flat shipping reels while another employee was picking up the reels with a telehandler after they were painted. The telehandler bumped a reel, causing other reels to fall. The injured employee was caught between the reels, resulting in broken left femur.

An employee was installing an aerial drop cable across a roadway. The employee was on a ladder positioned against a telephone pole. Cable had been installed on one side of the roadway. The employee was making the connection to the pole on the opposite side of the roadway when a box truck contacted the cable, causing the employee to fall onto the grass of the customer's yard. The employee sustained broken ribs and was hospitalized.

An employee was performing routine housekeeping duties when a bale of plastic bottles slid off the forks of a forklift that was backing out of a trailer. The bale struck the employee, pushing her into another machine. The employee suffered a fractured rib and punctured lung.

An employee was using a 4-by-4 to straighten a pack of wood. A forklift nudged the 4-by-4, which caused the employee's right hand to be caught between it and the pack of wood. The employee suffered a partial amputation to the right ring finger.

An employee was polishing a bar on the lathe with sandpaper when the bar wrapped around the employee's glove and pulled it off. The employee sustained fractures to their index finger, wrist, and a knuckle.

An employee was using an electrical meter to troubleshoot an electrical drive system. While removing the probe, the employee made contact with the bus and was shocked. The employee sustained burns to their fingers and a dislocated shoulder.

An employee was setting up a furnace and lighting the torch on the furnace when they sustained burns from a flashback flame. The employee was hospitalized with burns to their head, face, chest, arms, and armpit area.

An employee was using a metal bar tied to a nylon strap attached to a jib crane to tighten a metal ring on a heated extrusion press. The metal bar flew off and struck the employee in the left forearm, fracturing it.

An employee was troubleshooting the lift table of the automated take-up mechanism on the jacket extrusion line. He was able to get the table to raise up, at which point it engaged and lowered. The employee's leg was pinned between the lift table and the concrete floor. His ankle was broken and he was hospitalized, requiring surgery.

An employee was working to deliver mail to an apartment building. She was waiting for a customer to move, to obtain clearance to the mailboxes. The door swung inward and closed on her right little finger. The top half of her finger was surgically amputated.

An employee fell from a step ladder while reaching for a tie-off point. He impacted the ground, and landed on his bolt bag which contained tools. The employee was hospitalized with fractured ribs, and a lacerated spleen and kidney.

On October 30, 2025, an employee was working to adjust a stackable metal shipping container. As the container dropped into place, it caught the employee's hands in an area between the upper and lower cross-members. The employee suffered a laceration to the left ring finger that required stitches, bruising to the right ring finger, and fractures to the right middle finger that necessitated medical amputation of the fingertip.

An employee was moving a scissor lift through a doorway. The employee was pinned between the scissor lift and the doorframe, sustained a back injury, and was hospitalized.

An employee was setting up communication equipment for a meeting. They were walking and tripped over a speaker on the ground. The employee sustained a leg injury.