Caught in running equipment or machinery during maintenance, cleaning · Burns and other injuries, n.e.c.
At a glance
Federal OSHA recorded a severe workplace injury
at New Wincup Holdings INC., 1351 W. Hawthorne Ln., WEST CHICAGO, ILLINOIS 60185
on — Burns and other injuries, n.e.c., affecting the hand(s), unspecified.
Final narrative
An employee was performing maintenance on a cup production line. The employee was removing a defective cup when the bottom mold and the top mold closed, burning and lacerating the employee's right hand.
An employee was operating an extruder when their little fingers were caught in the rotating rollers of the machine. The employee sustained amputations to both of their little fingers.
An employee was cleaning a plate on a printer when their rag was pulled into the roller. The employee's left middle fingertip was pinched and amputated.
An employee was performing airflow maintenance work on a foam cup machine. The mold caught the employee's left hand as it came down, causing a laceration and burns. The machine was unguarded at the time.
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 326140)
An employee was performing a maintenance task on a shape mold machine. The equipment had a clog preventing it from pumping material into the next stage. The employee's left hand was inside the hopper's butterfly valve when it unexpectedly turned. The employee's index and middle fingertips were partially amputated.
An employee was stacking used cardboard onto a pallet in the shipping and receiving area when he tripped over the scale by the loading dock door. The employee fell to the concrete floor and was hospitalized with a fractured left hip that required surgery.
On May 14, 2025, an employee was manually adjusting a plastic sheet entering the thermoforming oven when their right hand was pulled into the pin chain and idler wheel. The employee sustained the amputation of their middle finger.
At 6:30 p.m. on April 23, 2025, an employee was using a CNC panel saw when his fingers were pinned in by the pressure beam used to hold the board he was cutting. The sawblade, coming from beneath, amputated about 1/4 inch of his right little fingertip.
An employee was diagnosing an issue with a bagger that had jammed. The employee was cleaning out a piece of supporting equipment (a scrap barrel) when the blower motor contacted his right middle fingertip and fingernail, resulting in an amputation. The blower motor was not guarded at the time.
An employee was changing a die in a press when the die slipped and crushed the employee's left index finger. The employee sustained an open facture of the tuft of the left distal phalanx and a partial amputation.
An employee was driving a boom lift (in the lowered position) in an exterior dock area. The lift s left wheels rolled onto base plates that covered a 3-foot-deep sump pit. The base plates failed, and one side of the lift dropped. The employee's left leg was caught under the lift basket, and he suffered a fracture to the lower leg including the ankle.