MONTFORT, WISCONSIN—
Wanzek Construction, Inc.
Compressed or pinched by shifting objects or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury at Wanzek Construction, Inc., 504 Old HWY 18, MONTFORT, WISCONSIN 53569 on — Amputations, affecting the fingertip(s).
Final narrative
Employees were aligning an electrical cabinet on a deck inside the entrance to a wind turbine. They were using a come-along, connected to an anchor at the base of the tower, to position the cabinet at the center of the tower. While an employee was checking for proper positioning, the cabinet moved toward the tower wall and his right index finger was caught in the 1/2-inch gap between them. The fingertip was amputated.
More severe injuries at Wanzek Construction, Inc.
GREEN FOREST, ARKANSAS—
Wanzek Construction, Inc.
During crane assembly, an employee's left middle finger was caught in a bridle pin while trying to move counterweights, resulting in a fingertip amputation.
BAY CITY, TEXAS—
Wanzek Construction, Inc.
A crew was working on assembling/disassembling a crawler crane. The injured employee was removing the becket pin from the crane block. When the pin came out of the hole, the becket dropped onto his right middle fingertip, resulting in amputation.
EL CAMPO, TEXAS—
Wanzek Construction, Inc.
An employee dropped a bolt which then went into a small hole. The employee reached down to retrieve the bolt and was bitten by an Eastern cottonmouth snake. The employee was hospitalized.
SAN PERLITA, TEXAS—
Wanzek Construction, Inc.
An employee developed heat illness at a wind turbine erection work site. The employee was hospitalized, suffering from heat-related muscle injury.
CRYSTAL RIVER, FLORIDA—
Wanzek Construction, Inc.
At 8:30 p.m. on June 7, 2022, an employee became ill while working with a crew to adjust solar dampeners. He was hospitalized that afternoon for heat illness and a heat-related muscle injury. On the day before, he was installing dampeners for 10 hours and experienced symptoms of heat illness.
View Wanzek Construction, Inc.'s full OSHA safety record →
Similar incidents · Same event type
MECHANICSBURG, PENNSYLVANIA—
TForce Freight
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
DELAWARE CITY, DELAWARE—
Liveo Research, Inc.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
FORT WORTH, TEXAS—
Best Pump and Flow
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
BUFFALO, NEW YORK—
FORD MOTOR COMPANY
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
UNADILLA, GEORGIA—
Lasseter Tractor Company. Inc.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 237990)
SOUTH PORTLAND, MAINE—
HB Fleming, Inc.
A crew was installing drilled micropiles alongside an outdoor covered deck foundation. The injured employee was working the front of the drill when a loose section of casing dropped onto the tip of a rig wrench and pulled the wrench down to an embedded casing. The employee's left little finger was caught between the rig wrench and the embedded casing and was amputated above the top knuckle.
BURLINGTON, COLORADO—
Takkion OPS Management
An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.
PALM CITY, FLORIDA—
Ahtna Marine and Construction Company, LLC
Employees were securing the fuel line of an outboard motor in preparation for removing the motor from a small vessel located in the equipment yard. A gasoline-related fire occurred and one employee sustained burns to both hands and forearms.
MENOMONIE, WISCONSIN—
Michels Construction, Inc
A marine diver/construction worker was working underwater, using a hydraulic dredge to clear sediment away from the base of a dam. The dredge's suction nozzle began migrating toward him, and then pulled in his right hand and forearm. He sustained compartment syndrome in the hand and forearm.
PORT ISABEL, TEXAS—
Bechtel Energy Construction Services, Inc.
An employee was standing on a sheet of -inch by 4-foot by 8-foot plywood on top of a rebar mat, supervising his crew. As he was moving to alert the crew to an incoming overhead load, he stepped off the plywood and his left foot slipped through the rebar mat and landed on the rebar mat below. His left ankle was broken and dislocated.
More severe injuries in WISCONSIN
MADISON, WISCONSIN—
RG Professional Carpenter, Inc.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
FRANKLIN, WISCONSIN—
General Thermodynamics, Inc.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
SAINT CLOUD, WISCONSIN—
Sargento Foods Inc
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
HIXTON, WISCONSIN—
Asher Enterprises, Inc.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
VERONA, WISCONSIN—
Consolidated Electrical Distributors Inc.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.