Contact with hot objects or substances · Heat (thermal) burns, unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at Yale University, 261 Park Street, NEW HAVEN, CONNECTICUT 06511
on — Heat (thermal) burns, unspecified, affecting the multiple body parts, unspecified.
Final narrative
An employee was unbolting and removing a steam valve for inspection when they were splashed by the hot condensate. The employee sustained burns to his face and upper body.
An employee was conducting an experiment with a rat. The rat bit a finger (first digit) on the employee's left hand that resulted in swelling and pain due to an infection. The employee was hospitalized for treatment.
An employee was using a portable table saw to cut wooden strips when a wood strip kicked back, pulling their left hand into the rotating blade. The employee's left index finger and another finger were lacerated, and the ring fingertip was amputated to the joint. The employee was hospitalized.
An employee was working to secure a full-size enclosed pan rack, measuring 69 inches tall, that was on the liftgate of a box truck. As the liftgate was lowered, the pan rack rolled down from the liftgate and fell onto the employee, causing her to fall to the ground. The rack, which was loaded with food items, landed on her leg causing a fractured femur.
An employee was walking to an event from her office when she slipped on ice on the sidewalk and fell, resulting in multiple injuries to her elbows that required hospitalization.
On May 19, 2022, a postdoctoral fellow was handling rats during an experiment. A rat bit her right index finger, and the wound became infected resulting in hospitalization.
An employee connected a steam line to a hose to clean equipment when the fitting broke loose. They were struck by steam in the left inner thigh, resulting in burns that required hospitalization.
An employee was making tea when she noticed tea grinds were collecting on the side and water was no longer dripping through the funnel. The employee was checking the funnel when boiling water and tea grinds spilled onto the left side of her body. The employee sustained burns to her neck, back, and arm.
An employee had turned off the ball valve on a waterpipe system and was removing the plug when the coupling system attached to the strainer came apart. Hot water sprayed on his arm and back, resulting in first- and second-degree burns that required surgery.
An employee was using a shovel to remove waste vermiculite from molten zinc. The metal had been placed in a bin and partially hardened. The employee broke through the partially hardened metal; still-molten metal flowed to the employee's steel-toed right boot and entered through the cloth boot tongue. The employee suffered a third-degree burn to the right foot and was hospitalized.
More severe injuries in this industry (NAICS 611310)
An employee was removing boxes of filters from a skid when he tripped on a manual pallet jack. The employee fell and struck his back on the base of the pallet jack, resulting in hospitalization with fractured ribs.
An employee was walking through a parking garage. She tripped over a curb and fell forward onto her right knee, then her left knee, both hands, and her face. She suffered an injury to the left knee that required surgery, as well as scrapes on the chin and both palms and soreness in the left wrist.
An employee was using a hose to clear storm drains after a sewer backup. The employee fell backward and his head struck the curb, resulting in an Injury on the right side of his head, generalized bruising, and pain in his left ankle, right hip, left shoulder, and neck. The employee was hospitalized.
An employee was working on an exhaust fan on the roof when he tripped on a wire and fell to the ground. The employee sustained scrapes on his elbow, and a fractured right knee with a torn ACL. The employee was hospitalized.
An employee was replacing the back bracket on a deep fryer when her screwdriver slipped, causing her to fall forward into hot oil. She suffered burns on both arms up to the elbows (including the hands and fingers), as well as on the face and neck. She was hospitalized.
An employee was checking on a machine outside of the building and removed a cover to clean out a blocked area. His hand was caught by a rotary valve in a dust collection machine. The employee's fingertip was amputated.
An employee was working to clean a glue roller with a scraper tool. The tool and the employee's left thumb were pinched between two rollers, resulting in a partial amputation.
An employee was re-arranging boxes of pipe insulation on a pallet. One of the boxes fell from the pallet and knocked over an upright empty cylinder. The cylinder fell and crushed the tip of the employee's right toe. The employee's toe required surgical amputation.
An employee was securing the claw of a grapple truck to the truck bed. His left little finger was caught between the tie down strap and the rub rail of the truck, resulting in partial amputation of the finger.
An employee was cutting extruded aluminum framing material using a horizontal band saw. She went to grab a rag in the machine when the rag contacted the blade and pulled her hand in toward the blade, resulting in a partial amputation of the right index finger.