Federal OSHA recorded a severe workplace injury
at Yale University, 135 College St., NEW HAVEN, CONNECTICUT 06510
on — Fractures , affecting the Thigh(s).
Final narrative
An employee was working to secure a full-size enclosed pan rack, measuring 69 inches tall, that was on the liftgate of a box truck. As the liftgate was lowered, the pan rack rolled down from the liftgate and fell onto the employee, causing her to fall to the ground. The rack, which was loaded with food items, landed on her leg causing a fractured femur.
An employee was conducting an experiment with a rat. The rat bit a finger (first digit) on the employee's left hand that resulted in swelling and pain due to an infection. The employee was hospitalized for treatment.
An employee was using a portable table saw to cut wooden strips when a wood strip kicked back, pulling their left hand into the rotating blade. The employee's left index finger and another finger were lacerated, and the ring fingertip was amputated to the joint. The employee was hospitalized.
An employee was walking to an event from her office when she slipped on ice on the sidewalk and fell, resulting in multiple injuries to her elbows that required hospitalization.
An employee was unbolting and removing a steam valve for inspection when they were splashed by the hot condensate. The employee sustained burns to his face and upper body.
On May 19, 2022, a postdoctoral fellow was handling rats during an experiment. A rat bit her right index finger, and the wound became infected resulting in hospitalization.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.
An employee was attempting to lift a steel beam from a horizontal, stacked position to a vertical position using a crane. They had placed two hooks on the east side of the beam on the flange. As the employee was hoisting the crane, the beam began to shift and pulled the employee forward onto the stack. When the material shifted, the hooks released and the material fell, pinning the employee between the two beams. The employee was hospitalized with soft tissue contusions on their proximal right thigh and interior left thigh.
An employee was moving a tensile strength test device with a dolly. The device fell from the dolly onto the employee's right leg, causing a compound fracture.
An employee was removing boxes of filters from a skid when he tripped on a manual pallet jack. The employee fell and struck his back on the base of the pallet jack, resulting in hospitalization with fractured ribs.
An employee was walking through a parking garage. She tripped over a curb and fell forward onto her right knee, then her left knee, both hands, and her face. She suffered an injury to the left knee that required surgery, as well as scrapes on the chin and both palms and soreness in the left wrist.
An employee was using a hose to clear storm drains after a sewer backup. The employee fell backward and his head struck the curb, resulting in an Injury on the right side of his head, generalized bruising, and pain in his left ankle, right hip, left shoulder, and neck. The employee was hospitalized.
An employee was working on an exhaust fan on the roof when he tripped on a wire and fell to the ground. The employee sustained scrapes on his elbow, and a fractured right knee with a torn ACL. The employee was hospitalized.
An employee was replacing the back bracket on a deep fryer when her screwdriver slipped, causing her to fall forward into hot oil. She suffered burns on both arms up to the elbows (including the hands and fingers), as well as on the face and neck. She was hospitalized.
An employee was checking on a machine outside of the building and removed a cover to clean out a blocked area. His hand was caught by a rotary valve in a dust collection machine. The employee's fingertip was amputated.
An employee was working to clean a glue roller with a scraper tool. The tool and the employee's left thumb were pinched between two rollers, resulting in a partial amputation.
An employee was re-arranging boxes of pipe insulation on a pallet. One of the boxes fell from the pallet and knocked over an upright empty cylinder. The cylinder fell and crushed the tip of the employee's right toe. The employee's toe required surgical amputation.
An employee was securing the claw of a grapple truck to the truck bed. His left little finger was caught between the tie down strap and the rub rail of the truck, resulting in partial amputation of the finger.
An employee was cutting extruded aluminum framing material using a horizontal band saw. She went to grab a rag in the machine when the rag contacted the blade and pulled her hand in toward the blade, resulting in a partial amputation of the right index finger.