105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Johnson Controls, Inc.

Caught in or compressed by equipment or objects, unspecified · Fractures

Federal OSHA recorded a severe workplace injury at Johnson Controls, Inc., 5005 YORK DRIVE, NORMAN, OKLAHOMA 73069 on — Fractures, affecting the foot (feet), unspecified.

An employee was installing a base pan to the rails on a lift table. The conveyor was lowered to the home position and the employee's left foot was pinned underneath the table, resulting in a fracture.

Hospitalized Foot (feet), unspecified Machinery, unspecified

Johnson Controls Inc.

An employee was manually adjusting a wooden pallet when he lost his balance and fell to the floor. The pallet fell on the employee's abdomen and they were hospitalized with internal bleeding.

Johnson Controls Inc

On July 3, 2024, at approximately 8:00 AM, an employee was installing a pulling sheave in an electrical gear when they received a high-voltage electrical shock and sustained arc flash burns.

Johnson Controls Inc

An employee was walking down a concrete pier, tripped over a pallet, and fell. The employee sustained a broken arm.

Johnson Controls Inc.

An employee was removing a part from a brake press when the machine's backstop came back and caught the employee's finger against the bottom die. The employee's fingertip was crushed and degloved, and the employee was hospitalized.

Johnson Controls, Inc.

An employee was walking when they slipped and sustained an injury to the foot/heel/lower leg.

View Johnson Controls, Inc.'s full OSHA safety record →

N. S. Giles Foundations, Inc.

An employee was changing mud cups in the hopper cylinders of a concrete pump truck. The cylinders moved and three of the employees fingers were amputated.

Weld Mech, Inc.

An employee was standing on the rig floor next to a polishing unit. His hand was placed on the polishing unit when the pump was lowered, resulting in amputation of their right thumb, ring, and middle fingertips.

Axium Packaging LLC

An employee was using air to blow out the air wash to the blender and grinder station. As the employee reached to verify that the air wash was clean, the unit pinched and amputated their fingertip.

PanTerra Energy

An employee was retrieving a lost drill pipe with a lifting bail when their left thumb got pinched between the table and handle of the lifting bail while trying to re-thread the pipe to lift it out. The employee suffered an amputation to the left thumb.

Graphic Packaging International

An employee was removing a core chuck from a stationary roll when their right ring finger was pinched between the chuck and the roll. The employee's fingertip was amputated.

G & F Manufacturing, Inc

An employee was servicing a pool heater and was electrocuted when their right elbow came into contact with a 220-volt electrical line.

Fulton Thermal Corporation

An employee was operating a drill press when their hand became caught in the drill and they sustained an amputation to the distal end of their right ring finger.

Hydro Air Components, Inc.

An employee was operating a hydraulic brake press when the machine cycled and came down on his right hand, resulting in cuts to his index, middle, and ring fingers. The employee sustained a medical fingertip amputation.

A. O. SMITH WATER TREATMENT (NORTH AMERICA), INC

An employee was operating a drill press in the small parts department when their glove was caught in the drill press resulting in amputation of their right ring finger below the first knuckle.

Rae Corporation

An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.

Meeco Sullivan

An employee was cutting a piece of metal rod with a metal cutting machine. His right middle finger became caught between the rod and the machine's table. The employee's fingertip was partially amputated.

Edward Jones Investments

An employee was working at her desk. She went to stand up and fell to the floor beside the desk. The employee sustained a hip displacement and required surgery.

Burgess Manufacturing of Oklahoma Inc.

An employee was processing wood boards at a chop saw when the saw malfunctioned and the blade cut her left hand and fingers. She was hospitalized and her little finger was surgically amputated.