RedGuard LLC

An employee was loading a portable storage container onto a dovetail trailer. This requires hooking up a bridle to the container and lifting the container enough for the dovetail to begin to slide under it. The employee reached and held the bridle lock to allow the trailer to move under it when the trailer moved backward instead of forward and caught his finger. The employee's right middle finger was amputated between the fingernail and the first knuckle.

An employee was using a table saw to cut a 1-inch strip from a piece of 24-inch-wide vinyl flooring. The saw's 10-inch blade amputated the employee's left index fingertip.

An employee was operating a machine when a wire pulled his right glove resulting in amputation of the index and middle fingertips.

An employee was grinding chicken when their right index fingertip was caught in the grinder and amputated.

An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.

An employee was passing through a large metal door when the door closed on the employee, resulting in a cracked rib.

An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.

An employee was standing on a 10-inch high working platform (36.75"x24"x10") verifying that tanks were being picked up properly by an overhead conveyor. The employee turned and was stepping off the platform when their left work boot caught the edge of the platform. The employee fell to the concrete floor and landed on their right side. The employee's right hip was fractured.

An employee was working on a vessel, attaching the base plate ring to the legs, when the base plate shifted about 3 inches. The employee's right foot became pinned between the base plate and the floor. Three toes were crushed. The employee was hospitalized and required surgery, resulting in partial amputation of their toe tips.

Two employees were constructing a 30-foot-tall aboveground storage tank, fitting a double roof on the tank. Half of the roof had been stitch-welded to the tank, and the employees were fitting/tacking down the second half of the roof, when the roof shifted and fell in. One employee fell and sustained fractures to their right foot and shin. The second employee suffered a broken back. Both employees required hospitalization.

An employee was removing stretch wrap from between shipping pallets when she tripped/stumbled and fell, resulting in a fractured hip.

Two employees engaged in a verbal altercation. The injured employee was punched in the face and fell, hitting their head on the concrete floor. The employee sustained a brain bleed and blunt force trauma to the face.

An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.

An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.

An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.

Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.

An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.