Struck by object or equipment, unspecified · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Shaw Industries Group, Inc., 900 V. D. Parrott Jr. Parkway, DALTON, GEORGIA 30721
on — Fractures, affecting the multiple pelvic region locations.
Final narrative
An employee was standing next to a stretch wrap station where rolls of backing are unloaded from a doff truck. As the employee walked between the doff truck and the wrapping table, the truck was doffing a roll of carpet backing. The roll of backing struck the employee, knocking him to the ground, and pinning one of his legs under the roll. He sustained a non-displaced fracture of the hip and pelvis.
HospitalizedMultiple pelvic region locationsReels, rolls, spools, coils, cones
More severe injuries at Shaw Industries Group, Inc.
An employee was operating a standup forklift and following a training mentor that was operating another lift truck. The vehicle in front stopped and as the employee went to move out of the way, their left foot was crushed against the stopped forklift.
An employee was troubleshooting equipment when their hand was caught on the belt and their arm was pulled in, up to the forearm. The employee was hospitalized with lacerations and steam burns to their arm(s).
An employee entered a trailer to finalize the load for shipment. After placing the final product, a 5-gallon pail, on the floor and inspecting other items, they turned to exit the trailer. The employee misstepped and fell, striking their torso and head on the trailer floor. The employee sustained rib fractures, a collapsed lung, and a head laceration.
An employee was working on a piece of equipment that cuts rolled finished goods. As the rolled product conveyed down the line, the employee placed the customer's shipping document into the inner core tube. As the employee was withdrawing his right hand, it was pinched between the roll's core and the frame of the equipment, resulting amputation of the ring fingertip.
On February 3, 2023, an employee was placing and adjusting dock plates when his finger was caught on a case of yarn. This prevented the dock plate from extending properly into the trailer, and it pinched and fractured three of the employee's fingers. He was hospitalized, requiring surgery.
An employee was checking the function of newly installed actuators when they were struck by a pressurized release pipe. The employee suffered fractures to the orbital socket and shoulder, requiring hospitalization.
An employee was completing a service call and looking at a water pump when the pump cover plate struck their forehead. The employee sustained a forehead laceration and fracture requiring hospitalization.
An employee was removing chains from a steel tube. A sorting hook attachment was caught on the staging area cross member. When he raised the chains, the sorting hook snapped back and struck the employee's face causing a fractured jaw.
An employee was in the sawmill basement using a push broom and shovel to clean wood chips and sawdust. The employee's right arm was struck by a wooden board between the wrist and elbow, resulting in a fracture.
More severe injuries in this industry (NAICS 314110)
On September 10, 2025, an employee was working to fix a slipping carpet on a conveyor. He went to lift the carpet and put it back on the top rail when the conveyor belt caught his right hand and a roller subsequently caught his arm. The employee was hospitalized with a broken forearm.
On July 31, 2025, two employees were walking near a friction wash tank when a rubber gasket on top of the tank blew. Hot water mixed with 50% caustic chemical sprayed out and rained down on the employees. Both employees were brought to an emergency shower and were neutralized with vinegar. One employee was hospitalized with chemical and thermal burns to their upper back and eyes.
On May 27, 2025, an employee had been sweeping the floor around the sort and grind line conveyor. She was wiping down the frame of the conveyor when her right arm was drawn up between the conveyor belt and the snub roller underneath the conveyor. She sustained fractures to her upper and lower arm.
On January 29, 2025, an employee was operating an extrusion machine. He put a broken piece of yarn on the secondary roller and his glove was pulled into the nip rollers. The employee's left little fingertip was partially amputated.
On December 20, 2024, an employee was preparing to remove the access panel for the rotary valve gear box underneath a washer in polymerization. When he began loosening the bolts from the rotary lock cover, hot water and steam pressure released and caused second-degree burns to the employees stomach, both thighs, and the left calf area.
An employee was helping to lift the grating from a floor draining system when the grating slipped and landed on his hand, resulting in the amputation of his right middle finger at the first joint.
During a workshop meeting in a hotel, an employee heard a drilling noise, so he walked outside to see what it was. An explosion occurred (possible gas line) and his face, ear, and hair were burned. He also fell and sustained a pelvic fracture.
An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.